Community : Popular Threads - POD, Pocket POD, PODxt Family, FloorPODs, Bass PODs

MAC OSX 10.6 Snow Leopard x86 & Line6 Edit for PODxt Pro

support@line6.com — Mon, 28 Sep 2009 12:41:01 GMT

Guys,

I'm getting the following exception when trying to launch Line6Edit for my POD xt Pro on Apple's latest OS on a Mac Mini :

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 9/28/09 1:37 PM

In thread: Thread[main,5,main]

OS: Mac OS X (10.6.1 i386)

Java VM Version: 1.6.0_15

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

Any ideas ?

Cheers,

Stricnine.

Windows 7 64bit

support@line6.com — Mon, 05 Oct 2009 04:31:17 GMT

Hi,

I just recently installed Windows 7 64bit operating system, this is final retail version.

I have POD XT live and Pod farm, etc and I installed the POD XT live drivers and Line 6 Monkey. However, whenever I play back an audio, it has a crackling sound.

I don't know why this is happening. I also browsed the forum and tried some of the suggested work arounds but this issue isn't resolved.

Can you please tell me what I should do to resolve this crackling sound?

Also the LIne 6 Monkey doesn't show anything listed all under Updates. I installed the Line 6 Monkey 64bit version that is supposed to be compatible for Vista 64bit but that

didn't make any difference and the crackling sound is still there.

Thank you for your help.

Charles Laub

email: charle39@gmail.com

POD XT Live ESN: 01466556

Recording Music

support@line6.com — Wed, 18 Nov 2009 12:54:42 GMT

Hello,

I bought the line 6 pod farm for my boyfriend so he could record his music and burn it to a CD. When I went to Guitar Center, that is what I told them I was trying to do and they sold me the Line 6 Pod farm. And while he absolutely loves it and all that he can do with it, he still cannot seem to get it to actually record his playing to his computer in any format that can be shared or burned to a CD. Is he missing a step or is he missing some other system or program that is needed to actually be able to accomplish that part?

Thank you!!!

Pod XT Live Expression Pedal Failure

support@line6.com — Sun, 15 Nov 2009 17:47:30 GMT

My expression pedal has been giving me fits lately. During the last several performances (I play every weekend) it's been a guessing game with this thing. When I power up the unit it will perform as it always has in the past but lately after a short time the expression pedal will suddenly fail the result being full output of the particular patch down the line.. Sometimes if I power down and power back up the problem will go away but then reappear a short time later. It's unpredictable. Other times when I power up the expression pedal doesn't work at all, full volume. I've been running a cry baby down line to try to manage this but it very inconvenient and is certainly not what I want. I've read about recalibrating the pedal but that doesn't sound like thats the answer. The pedal does work SOMETIMES b ut only for a short time. Whats up?

POD 2

support@line6.com — Sun, 15 Nov 2009 14:34:22 GMT

Have an original pod and software. Just got a macbook and tried to use software. Says, "Classic environment no longer supported". Is the software no longer useful? Is there something I can do to remedy the problem? Not a big techy and only need the capabilities that came with ver. 2. Thanks.

Pod 2.0 to laptop connection freak-out and frustration!

support@line6.com — Sat, 07 Nov 2009 01:26:25 GMT

I have been trying to download Line6 edit and Line6 Monkey, and I am way past frustrated. One of the main reasons I bought the Pod 2.0, was to go online and download custom tones. I can't even get the edit and monkey software to load...keeps asking me to make sure I am connected to the Internet because Java runtime environment needs to be installed, or to connect my Pod to my computer; I am, it is, but it won't.

...$200 for this Pod, and then I find out I have to buy a MIDI to USB cable in order to use it with my computer (seriously, how hard would it have been to have a freakin' USB port on the Pod 2.0? Should I really have to pay $300 for the Pod XT to have it. Come on, seriously???!!!). I'm a little annoyed until I find out the cable costs about 50 bucks, and "a little annoyed" turns into: really, really annoyed. I mean, come-on, 3 more cables and I could have bought another Pod 2.0!!

I've downloaded installed, uninstalled, and reinstalled edit, monkey, Java, and JRE a dozen times. I even completely reinstalled Windows XP on my computer to start fresh. NOTHING WORKS AND YOUR SUPPORT INSTRUCTIONS ARE CONFUSING AND INCOMPLETE!!!

Now, having said all this, I love the Pod 2.0 itself...great sounds. But can someone please help me GET THIS THING HOOKED UP AND TALKING TO MY PC BEFORE I GO COMPLETELY NUTTS?

Sincerely,

Alan

Pocket Pod Footswitch! Anyone know what this is?

support@line6.com — Tue, 17 Nov 2009 12:36:32 GMT

Found it poking around haphazardly.

http://www.youtube.com/watch?v=2sDm5nYn4kA&feature=channel

Recording vids directly to PC using Mic or USB plug

support@line6.com — Thu, 19 Nov 2009 13:16:32 GMT

Hey I was wondering if this question/issue has came up in the past. I am trying to record a vid for youtube using my POD x3 live by using the webcam software provided with my PC. When I record direct, (mic or USB connection), there seems to be an audio clipping/dropout/chopping going on. I have adjusted the recording volume and that has cured the clipping issue so it records the full spectrum of the sound but it hasnt fixed the other problem. The volume dips on the recorded track and does not stay consistent. I think I have found a way to circumnavigate this issue but its somewhat of a headache by recording the video on mute and recording the track on Audacity Beta 1.3 (which is an awesome software!!) and then using windows movie maker to combine the two to overlay the tracks. If you have any ideas on how to remove that step I would greatly appreciate it. Thanks

Lee

PS When is line 6 going to produce a cabinet/amp to support the POD family similar to the Tech 21 and the Atomic? You guys make great amps and modelers and I think you are really missing out on a great market niche.

forgot password, deleted email.

support@line6.com — Fri, 13 Nov 2009 04:12:09 GMT

i forgot my email password,deleted it. finally wanted to get back to my line 6 pod xt live and now i cant register it under a different user name cuz i cant remember my password to the old line 6 account. Help!

Getting hum when I plug my usb cable into my computer.

support@line6.com — Tue, 27 Oct 2009 20:47:05 GMT

I think I may have an unwinnable situation here. I get alot of hum whenever I plug in my PODxt to my computer via usb.
I can alleviate these problems by

Removing power from the laptop and having it run on battery power alone (I've tried different outlets and different power strips)

Not using a tone setting with a lot of overdrive

unplug the usb (duh), but that makes recording slightly impossible (I think)

If I touch either pickup (humbucker) the hum goes away

I've done some reading, and appears as though this is a ground loop issue that there isn't a solution for (or one I found)
Granted I am on some heavy meds and my focus isn't the best.
Now this does not happen on all guitars equally

So, does anyone know how I can have my USB and eat it too?

Thanks in advance. Oh yea, I can control the hum with volume as well, but I lose the dirt if I lose the volume.

I was looking at this http://www.amazon.com/Monster-MP-HTS850-Theater-PowerCenter/dp/B00006343O/ref=sr_1_17?ie=UTF8&s=electronics&qid=1256675022&sr=1-17

A power conditioner was recommended to me, but looking at the prices of them, there's no way I can afford one, unless I am looking at the wrong place.

Is there a video anywhere that shows how to navigate the buttons on my pocket pod

support@line6.com — Tue, 17 Nov 2009 04:01:53 GMT

Is there any documentation or better yet, any video that better shows how to navigate the buttons and knobs on my pocket pod. The instruction book doesnt explain how to navigate it clearly enough for me.

Thanks for any help

Pocket POD registered to my Account - Line6 Monkey says it is not.

support@line6.com — Sat, 14 Nov 2009 18:47:14 GMT

I purchased a Pocket POD a few weeks ago. I have registered it to my account and it appears in my account correctly (see attached image: line6_registration_page.jpg Note: username in web account & Monkey the same; serial number blurred out intentionally). I used the Serial # from inside the battery compartment. When I launch Line 6 Monkey v1.31 and log into my account, it give me a dialog box stating, "It appears you have not registered your Pocket POD with your user account." (see attached image: line6_pocketmonkey.jpg). If I click "Register Now...", it takes me to my account page where it shows my device registered to my account. I followed your FAQ and ensured my serial number was in the form 'XXXNLNNNNNNNNNN'. I have tried the following with no success:

Logged out of Line 6 Monkey and log back in.
Waited 1 week to see if the serial number just needed time to associate.
Installed latest version of Line 6 Monkey on a different computer.
Deleted my registered device and re-registered it.

Current state of affairs: My device is currently registered to my account through the website, however Line 6 Monkey still shows it as unregistered.

Although the device is not registered it has allowed me to update to the latest firmware: 1.01, however I would like to ensure that my device is properly registered.

OS Info:

I have tried on 2 different machines running:

Windows Vista x86_32bit Professional and Ultimate.
Both are single boot systems.
The POD is recognized on both systems.
The Vyzex editor recognizes the device and I can control the POD through it.
Both machines are Intel Core 2 Duo, but running 32 bit versions of OS.
Both machines have 3 2.0 USB ports. I am connecting the POD directly to the computer.

Software Installed Machine 1:

Clean install with following software added
Reason + Record
EMU Patch Mix for a EMU 1616m
ASIO4All
Line 6 Monkey 1.31

Software Installed Machine 2:

Old OS install Vista 32bit Ultimate
Business Apps (MS Office)
Reason 4
Ableton 7
NI Kore
Sound Forge 9.0
Reaper
FruityLoops Studio
ASIO4All
ProTools 8.x
Digi002 Rack
Digi MBox2 Micro

Please advise on how to associate my POD correctly with Line 6 Monkey.

Upgrade not working properly

support@line6.com — Sat, 07 Nov 2009 23:31:30 GMT

I have a podxt live which is 4yrs old now. The problem that i am facing is that when i upgraded its flash memory with the newer version, line6 edit showed me the added amps and all but the thing is the patches dont work properly anymore. The reverb and delay didnt work for any settings. So i again rollbacked my version and now the delay and reverb are working properly and line6 is showing the earlier no. of amps.

Line 6 Edit Errors and Crashes

support@line6.com — Fri, 20 Nov 2009 02:29:32 GMT

Hi everyone, it seems there's probs to use Line 6 Edit on MAC.

Line 6 Monkey and Line 6 audio drivers work well.

Line 6 Edit can't open and say an error message when open :

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 20/11/09 03:00

In thread: Thread[main,5,main]

OS: Mac OS X (10.6.2 i386)

Java VM Version: 1.6.0_15

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

Tried to download Java Environment on SunnSystems webpage, it says concerning Apple MAC System/OS

that the java on MACOSX is included and should check MAC UPDATE for the plateform but it cant find anything new or updates.

I just can't use my gears on my laptop. Especially my POD PRO XT (Updated and full ModelPacks options)

So what now ?

Best regards

Jesse

Monkey doesn't show Pocket POD 1.01 flash update

support@line6.com — Wed, 18 Nov 2009 18:13:04 GMT

Hello,

I'm a customer from Germany and bought a Pocket POD back in December, 2007.

Today I read about the 1.01 flash upgrade for my Pocket POD and downloaded the Monkey software v1.31.

I connect my Pocket POD to the power adaptor first and after this connect it to my PC with the Line 6 USB cable, no other cables are connected to the POD.

The POD works fine with the Vyzex v1.17 software, so I launched the Monkey (after closing the Vyzex software). It connects to my Line 6 Account but shows "There are no updates available" :-(

[img]http://imghost.glorp.de/i/7515363356a7.png[/img]

The Pocket POD is registered within my account and the Monkey doesn't show any message about device registration either.

The POD shows "Version 1.00" at startup...

[img]http://imghost.glorp.de/i/22593416da5b.png[/img]

Thank you for any help.

New to Line 6....Need Help!

support@line6.com — Thu, 12 Nov 2009 17:37:36 GMT

Ok…I’m new to Line 6 products so forgive me if I sound ignorant & naïve about these products. I really could use some advice as to what products I need and how they work together. Any help and suggestions would be greatly appreciated.

Ok…first, what I am looking for:

1. I want to plug my guitar directly into a PA and be able to get great sounds from it.

2. I also want to do some desktop recording. I currently use Garageband 09 and I really like the Pod Farm interface and would love to be able to integrate it with garageband for my guitar tones.

3. I need to use some of the patches from the custom tone site in order to replicate specific tones when performing covers.

4. While I really want to use a unit for performing live, I don’t like the idea of having to be hunched over my unit trying to dial in tones. I would love to be able to have all of the tones I will need worked out ahead of time and just be able to trigger them later by stepping on a pedal.

5. I am confused between the line 6 monkey, pod farm, and gear box software. I want to be able to control my unit with the computer and then take the unit to a gig to recall what I created on the computer.

Some questions I have:

What is the difference between using a Pod X3 or XT with a FBV Shortboard instead of the X3 & XT Live models? I like the idea of being able to play with the pod without bending over and still have triggers to use with my feet.

When using custom tone, is it as simple as downloading the patch from the site and triggering when stepping on a pedal?

Thanks for any input…I’m new to this world of Line 6 and multi effect units and amp simulators.

I've switched my email addres...

support@line6.com — Fri, 06 Nov 2009 04:15:09 GMT

my user account: "timothyclee" was created when I purchased my POXT live, but I can't remember my password, and the email me my password function does not work since I no longer have that email address associated with this account. Please help

Pod XT ASIO drivers stop working in Cubase

support@line6.com — Mon, 09 Nov 2009 12:22:38 GMT

I'm using a pod xt with Cubase SX. I need to run Monkey every time I use Cubase to get any sound in or out from the pod. When I don't do anything for a while, then try to use Cubase, I get no input or output until I run Monkey again, then it works. I don't need an internet connection for monkey to connect to - just firing it up lets Cubase use the pod again. Any ideas? cheers

IRELAND + UK Power Supply for POD 2.0

support@line6.com — Fri, 20 Nov 2009 14:46:40 GMT

The power supply for my 2.0 is crocked. I know this cus I took the unit into a shop in Derry and he took the power supply out of another POD on sale and plugged my unit in which worked perfectly. The shop has no power supply units in stock for sale on their own. Of course they can order them in but because we're not a major metropolitan area it could be weeks before the shop needs to place an order for stock with Line 6.

Every music shop between here and Galway I've visited and no one stocks Line 6. This fruitless drive around the country has peeved me right off.

Someone please sell me a UK (240/9V/1200w) Line 6 AC Power Supply or I'm gonna have to emmigrate. I'll buy it on line right now if you can point me in the right direction.

PODxt Soundcard Problem

support@line6.com — Fri, 13 Nov 2009 16:43:08 GMT

I get random clicks, pops, static bursts every once in a while when I use PODxt as a soundcard. It happens when I am using my recording software and when playing music with wmplayer or winamp etc. More when I am making music though. I believe it has got nothing to do with CPU because it sometimes goes clean for a long time when I am working on a project with tons of recordings, VSTis, automation and stuff; then it suddenly makes a killing sound burst on a project with just one midi track and a simple VST. I have three USB (2.0 I guess) ports on my laptop. I've got a midi keyboard, a wireless mouse and PODxt attached to them. Disabling my onboard soundcard and wireless LAN won't help. Trying different settings for ASIO stuff (sample rate, bit depth etc.) won't help either. The laptop had Vista 64 bit installed. I had the above problem and i decided to install XP and make the machine dual boot as Vista is no good for making music (and anything else as a matter of fact). The problem persisted in XP too. Then I read somewhere in the site that as dual-boot machines are instable (?) Line6 does not provide support for them. I hoped maybe this was the problem and made a format, and I installed only XP SP3 this time. Nothing changed. I would really appreciate any help, I tried everything I could think of. Peace.

windows 7 compatability with podxt live, variax, workbench

support@line6.com — Tue, 17 Nov 2009 17:18:22 GMT

I am looking to upgrade my computer to windows 7.

i wanted to make sure before i did if the programs to run podxt live and the workbench software are supported.

i did a search before making this ? and did not find a thread that answered my question.

I know that I can try running the programs in compatability mode, but I found a few responses saying they had problems with that also.

sorry if this is already somewhere you can just post the link to the thread for me if your a better searcher than me.

thanks

E-prom chip for pod

support@line6.com — Sat, 29 Aug 2009 23:52:47 GMT

I called and requested an updated e-prom chip for my pod. Any idea on how long before it ships?

Windows Vista 64 bit problems with ASIO Pod XT

support@line6.com — Mon, 09 Nov 2009 19:56:26 GMT

When I run a DAW (cubase SX or Reaper), I get no input or output (even though I've selected the correct ASIO Pod XT drivers) until I start Monkey. Once Monkey starts everything works, for a while. Occasionally it'll stop working until I start Monkey again, and sound is once more. I can't recall having this trouble with these programs using Vista 32 bit.

Anybody know of any issues here?

Cheers

AUX input on floor pod plus

support@line6.com — Wed, 18 Nov 2009 00:16:55 GMT

Connected mp3 player to aux input using stereo jack; comes through rt channel only of headphones - is this expected? Uncomfortable listening to anything through only one channel of a headphones. Any advice? Thanks. N.

how to upgrade pod 1.x to 2.0?

support@line6.com — Wed, 04 Nov 2009 09:53:34 GMT

I bought a second hand pod ( thought it is 2.0). but turn up is pod 1.x. and i read throught infro, found out i can get some chips to upgrade my pod to 2.0. but there is problem, that i need to register the gear first, when i try to registed it, there is not a pod 1.x option. i try pod 2.0, but error message" gear not match with product code). so what can i do with it?

is that possible to buy the chips in new zealand?

cheers

Line 6 pocket pod, something doesn't work

support@line6.com — Wed, 11 Nov 2009 00:32:27 GMT

Hi,

my name's Jacopo Tropia, I'm an Italian customer, I bought some days ago your product "line 6 pocket pod" I think it's really nice for a musician, but I got some problem with that: I'm using a small laptop, I would like to have, to download or to play with new customized sounds. As is written on the instruction manual, your "pilot's guide" I downloaded "Vyzex Pocket Pod" and I dowwnloaded also "line 6 monkey". I had the following problem, and I would like if is possible more information,advice or othe; I really like your product. 1) My laptop doesn't reach to connect with the pocket pod,

2) I don't have midi because my computer is a simple and common laptop, so Vyzeks doens't work 3) line monkey asked me what kind of instruments I have but it's not written pocket pod 4) It's impossible don't know why to register the product.

I like the poket and I'd like to use that how is written, I would like to download, customize and create sound. Pleas if is possible for you to answer to my email address jacopomasterx@yahoo.it I wwould like to solve the problem with my laptop, you can send me if it's possible all the prograamss and the way for solve it. I'm lookin forward to hear from you

Permanently saving a custom tone to my Pocket Pod

support@line6.com — Tue, 17 Nov 2009 03:56:40 GMT

I just got a Pocket Pod. I hooked up the unit with the USB cable and it is functioning through the software.

What numbers are the empty presets in a new pocketpod and how do I permanently save a custom tone that I like to one of those presets. I assume that I would want to be saving the custom tone to an empty preset?

Thank you!!!

Free Pod Farm Plug-in for PODxt Pro owners?

support@line6.com — Fri, 13 Nov 2009 17:10:21 GMT

I recently was made aware of the fact the certain owners of the PODxt Pro were eligible for a free POD Farm plug in. Was a notification sent out to registered owners of this? I did not see any. Am I able to receive this gift as well as a registered PODxt Pro owner?

Thank you

Kevi aka camtah

user ID is: 458855

Why Does My POD XT Live Go Mental?

support@line6.com — Sat, 21 Nov 2009 16:18:30 GMT

I'm borrowing from a semi-off-topic post from a Bass Pod poster's thread here: http://line6.com/community/message/95307#95307. I have a guitar Pod XT Live with psycho gain management symptoms. While playing, the unit will spontaneously leap huge increments in volume, either upwards or downwards. I'll readjust my amp gain to compensate and then eventually, wham... off it goes to a radically different new volume setting. I'm not 100% on this, but I think I'm seeing this phenomenon more often when the unit is cold then after it has been powered on for some time.

Took it to an authorized repair shop in Wheaton, MD and after $100 and several round trips, it now seems to be a little worse.

No active electronics, just a passive Tom Anderson hollow drop-top directly into the unit. Cables are fine.

One thing I've noticed just by diddling with the thing, sometimes, immediately after one of these spontaneous gain changes, if I either (1) whack the volume pedal with my foot or (2) wiggle and reposition the "Drive" knob, the unit gain will restore to what it was just prior to the madness, but sometimes not. Last night I updated all of the unit software, reflashed the unit and calibrated the volume pedal. If I knew of any other possible remedies, I'd try them as well.

Is anyone aware of a calibration or reset procedure for all of the rotary encoders on the unit?

Because the unit is so flaky now (despite being well taken care of - no drops, etc.), I can't trust it in a live performance situation. The changes in gain are so prominent that it's disruptive to any performance. Also, like one of the other posters earlier in this thread, it's also becoming too much of a pain in the butt to practice or rehearse with. It's a shame because I am really fond of some of my home brew user patches, but I'm now afraid to use the thing.

Any deep knowledge Pod XT Live medicine men out there?

Substitute for Line 6 EX1 Expression Pedal

support@line6.com — Thu, 03 Sep 2009 17:00:11 GMT

Can anyone recommend a substitute for Line 6 EX 1 Expression Pedal for the POD XT Live !?

I read the reviews for the Line 6 pedal and they are really poor. So I thought may as well go in for a different brand of external expression pedal to attach to my Line 6 POD XT Live !

I have just downloaded Edit but it will not work.

support@line6.com — Thu, 19 Nov 2009 21:59:58 GMT

I have just downloaded Edit but it will not work. First problem; "unable to download Java Runtime.

Then downloade Java (V6.17) from Sun site. Edit still unable to find Java.

From the FAQs files this seems to be a problem that has been around for at least 6 months. When are you going to fix it Line 6?

update usb firmware pod xt from 1.01 without MIDI USB interface?

support@line6.com — Mon, 16 Nov 2009 13:20:15 GMT

Hello

I have a pod xt and want to use it for things like reamping. I'm working on a macbookpro snow leopard. I can't connect the pod via USB, I have an error message on the preference panel. The gearbox tells me to update the usb firmware, but I can't do that with line6 monkey because ot the version of the firmware that does'nt allow to update with usb!

I found this workaround but I don't want to spend money just to update the firmware. Is there another way to get my pod xt working on snowleopard?

Q: My unit cannot update via USB, and I have Flash Memory 1.01. How do I update from Flash Memory 1.01 to a newer version?

A: First, verify if you have 1.01. Please hit the TUNER button and scroll using the SELECT knob to the last page. If you have a version later than 1.01, you can use your USB connection.

In order to update your PodXt from version 1.01 to the latest version, you will need to download Line 6 monkey (as described above) as well as a MIDI to USB interface. We recommend the MIDI SPORT UNO from M-AUDIO. Install the drivers for your interface, then run LINE 6 MONKEY with your POD XT unit connected to your interface. Click on the CONNECT USING MIDI CABLES button, and make sure that you see the MIDI IN and MIDI OUTS set to your interface. Then go through the FLASH MEMORY installation as described above. After this is done, you will be able to update your PODxt series unit using USB. See the following link for more information on connecting to your Line 6 unit via Midi:

Pod XT Live &Windows 7

support@line6.com — Sat, 21 Nov 2009 09:07:52 GMT

Hi everyone,

I'm just bought a new laptop with Windows 7 on it and I can't seem to connect via USB. I've pulled out my old Vista laptop and everything is fine so I've updated all the drivers (not sure if it updates drivers within the Pod) and still nothing.

All I'm getting is the 3 duh duh duh's, so it's not feeling the device at all.

If anyone can help, I'd be grateful.

Regards

Steve

Why does my Bass Pod XT live go mental???

support@line6.com — Sat, 21 Mar 2009 07:48:32 GMT

New forum and all the history dies, so I'll ask the question again.

When I use my Yamaha TRB5 through any other amp its perfect. When I use any other bass through my BOD xt Live still good. When i use my YamahaTRB5 through the BOD xt live it can be fine for 30 min and then 1/2 way through a song, the volume and trebble both go through the roof. The only way to correct it, is to unplug the input jack and then reconnect.

Any thoughts?

help request

support@line6.com — Sun, 15 Nov 2009 08:55:14 GMT

hello
i have purchased the floor pod plus about two weeks ago and the store i bought it from (your only importer in israel) didnt had a case(gig bag) for it.
they told me to came back in two weeks for it because they supposed to get a new shipment ,but after one week the store was closed and probably for good.
i hope you can help me with this problem because i dont have anyone to turn to.
i dont know if u r the person that can help me and if not please pass this to the right hand .
i hope for replay any time soon

thank you

lior

Bass pod

support@line6.com — Wed, 11 Nov 2009 20:35:19 GMT

can anyone tell me what the impedence of the headphones output is..?

Second-hand PODxt Live Registration

support@line6.com — Thu, 19 Nov 2009 18:15:32 GMT

Hi,

I recently bought a second-hand XT Live but I am unable to register it as it has been registered by a previous owner. (I contacted the guy I bought it from but he claims he bought it second-hand himself and it was already registered. I now have no way of contacting the guy who registered it.) The serial number is 21FPD3P5528002676. I would appreciate if I could get this resolved. Thank you.

Regards,

Eoin.

Bass pod pro

support@line6.com — Mon, 16 Nov 2009 05:26:05 GMT

My unit recently began to cut out signal. It looks like it is re-booting almost, and then the sound will come back temporarily and it all starts over again. Is there a battery for this unit that might cause it to freak out like this??? If so, where can I get a replacement and find instruction on how to change it?

Phaser effect in POD XT live

support@line6.com — Fri, 23 Oct 2009 19:31:04 GMT

Hi,

I can't find a phaser patch in the POD XT live. I used to have the HD Spider Valve HD100 (GREAT amp) and it had a great phaser effect, but I can't find one in the XT live.

Thanks,

Richard

About Recording of Pocket Pod

support@line6.com — Mon, 16 Nov 2009 02:39:36 GMT

Hi,

Can I record music on my Macbook with Pocket Pod? I try it last night but I didn't hear anything.

I had a PodxtLive too. I used to record a music in GarageBand with it. Just plug in the USB cable.

Or I have to do it another method or software?

Thank U very much!

Regards

Keith

Line 6 Edit Problem

support@line6.com — Wed, 22 Apr 2009 01:35:44 GMT

I just downloaded line 6 Edit 3.0 for my XTLive. When I try to open it, I get this error message:

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V
App info: Line 6 Edit 3.00 release - build 96 - Wed Apr 19 17:14:08 PDT 2006
Date: 4/21/09 6:30 PM
In thread: Thread[main,5,main]
OS: Windows Vista (6.0 x86)
Java VM Version: 1.6.0_13

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V
at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)
at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)
at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)
at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)
at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)
at cmn.l6java.app.L6App.Launch(L6App.java:194)

I'm not sure what to do. Can someone please guide me.

XT Live driver installation problem

support@line6.com — Fri, 13 Nov 2009 23:06:32 GMT

I have followed all the necessary steps to install the drivers for my LINE 6 XT Live serveral times and on three different computer. The sofware installs on the computer via windows but at the finish screen it states that 'This device cannot connect'. I am well skilled in IT - can you please help.

PodXT not connecting on OS X via USB

support@line6.com — Wed, 29 Apr 2009 13:48:02 GMT

Hi,

I have a PodXT and I am trying to get it connected to my mac. I have a new MacBook (unibody one). Its running Leopard 10.5.6

I have downloaded the latest drivers, 4.1.0.

Its not detected in either Gearbox or Line6 Monkey.

I can connect to the PodXT using midi but GuiterPort Online doesn't support midi.

I've looked at a few posts on here and there are similar problems. Some have been solved by connecting directly to the mac rather than using a USB Hub. I have tried both and neither work.

Any help would be great.

Thanks,

Jamie

Pocket POD: Is Cabinet Tuning of Amp Out jack Independent of Direct Out/Phones jack?

support@line6.com — Sat, 24 Oct 2009 10:41:41 GMT

Here's the scenario: Let's say I want to feed the Amp Out into my Amp's FX Loop Return while simultaneously feed the Direct Out/Phones jack to the PA. I want the Amp Out sound to be without cab emulation, but I want the Direct Out/Phones sound to have cab emulation. Is this now possible given the recent fix of the Cab Tuning feature? If so, how do i set it up? The manual is silent as to whether this scenario is possible and it implies further that the Cab Tuning feature is specific only to the the Amp Out jack. If this is not the case, what did the fix really do?

POD 2.0 and PODxt are the

support@line6.com — Sun, 15 Nov 2009 00:44:17 GMT

Presets compatable? If someone sends me a preset from their xt and I have a 2.0 will I still be able to use the preset?

If this question is idiotic I am sorry, I still want to know but...sorry!

Thanks for your help...

Mark

Bass Pod xt live warranty question

support@line6.com — Sun, 15 Nov 2009 01:58:18 GMT

My Bass Pod XT Live has reverted to esn 000000000 and usb 0.0, and will not connect via usb.

I've read on threads that a secure memory chip may have to be replaced(?).

Is the repair covered under the warranty in Canada?

Problems with Download Java Runtime Environment for Line 6 Edit v 3.02

support@line6.com — Sat, 07 Nov 2009 21:00:29 GMT

Hi,

I have Java 6 Standard Edition (Version 6, Actualization 17) on my computer.

Trying to download from Monkey v1.31 the Line6 Edit 3.02 brings the following errors:

'Unable to download the Java runtime environment 1.5.0 .Setup will continue. Line6 will not work until JRE is installed.'

When I try to download tones from customtone I get the error:

'Cannot find valid JRE'

and

'Could not init JNI Loader'

What shall I do? Without being able to download tones, my POD XT Live is not worth a lot for me.

Would be nice if you have a idea. If I have to install another Java Software, pleas tell me exactly where I get it. On the SUN-Website are so many versions. I feel lost.

Thanks for your help

Thomas Schneider (thomas.schneider@img.com)

Cannot register my PODxt

support@line6.com — Fri, 13 Nov 2009 17:23:30 GMT

I wish to register my PODxt to my current account because I do not remember what my previous account was.

Ran Line6 Monkey on new computer, now the Metal pack add-on is gone from my PODxt.

support@line6.com — Mon, 16 Nov 2009 11:57:45 GMT

I just bought a new computer (Intel core i5, Asus p7d55d motherboard, 4 gb ram, Windows 7 home premium 64-bit)
I istalled the latest Line 6 drivers for Windows Vista/XP since there was none for Windows 7 (why?). Anyway,
it all went nice and smooth.
When I try to re-activate the add-on (Metal pack) in Line 6 Monkey 1.31, the progress bar when "programming
hardware" goes up to about 80%, then an error message appears;

"Transaction failed.
Reason: (Code 80007104) Failed write to firmware"

I know it's not my hardware that is failing (USB ports, cable whatever).
In the Help & Info bar the following message appears:

      "There was an error determining which Add-Ons you have installed. ((Code 80007506) The asset table in the hardware is corrupt.)
      Click the 'Reinstall' button to fix this problem (you must be connected to the Internet)
      Call Customer Service if you click 'Reinstall' and still see this error.

So, this re-activation B***S*** has actually corrupted the software in the PODxt,
and made the Metal pack disappear from my POD?
Sorry, i'm really disappointed.

Please help

Bass PodXT Midi Timeout

support@line6.com — Wed, 25 Mar 2009 01:58:07 GMT

Well I finally figured out my first problem, that was caused by having the device plugged into a hub.

So on to my second problem, again everything has been updated and computer meets specifications.

Now, everything is showing that the connections are good, and the pod shows up when I start Line 6 Edit, but when the Tone Locker tries to connect I am getting a midi timeout. At the same time the process bar is showing it trying to connect the display on the pod fade in and out not completely out just dim a little.

I also received the following message;

MIDI Timeout while requesting manual mode patch

cmn.l6java.patch.L6PatchManager$DeviceNotConnectedException: null

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 3/24/09 7:15 PM

In thread: L6Thread - 'L6MIDIJava dispatch thread' - started at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.Start - line 206

OS: Mac OS X (10.5.6 i386)

Java VM Version: 1.5.0_16

Stack trace:

cmn.l6java.patch.L6PatchManager$DeviceNotConnectedException

at cmn.l6java.patch.L6PatchManager.AcquireDevice(L6PatchManager.java:658)

at cmn.l6java.patch.L6PatchManager.RequestDeviceEditBuffer_Sync(L6PatchManager.java:717)

at cmn.l6java.patch.L6PatchManager.RequestEditBuffer(L6PatchManager.java:391)

at line6editbase.editor.L6Editor.SetCurrentPatch(L6Editor.java:673)

at line6editbase.editor.L6Editor.SetCurrentPatch(L6Editor.java:601)

at line6editbase.editor.L6Editor.OnMIDIPatchChange(L6Editor.java:932)

at cmn.l6java.patch.L6PatchManager.NotifyListenersOfPatchChange(L6PatchManager.java:886)

at modules.sharctone.device.L6SharcTonePatchManager.OnPC(L6SharcTonePatchManager.java:133)

at cmn.l6java.midi.L6MIDIManager.OnPC(L6MIDIManager.java:626)

at cmn.l6java.midi.L6MIDIManager.HandleTrackedPC(L6MIDIManager.java:307)

at cmn.l6java.midi.L6MIDIManager.OnMIDIEvent(L6MIDIManager.java:173)

at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.DispatchMIDIData(L6MIDIJava.java:550)

at cmn.l6java.midi.L6MIDIJava.L6MIDIJava.Run(L6MIDIJava.java:612)

at cmn.l6java.core.L6Thread.run(L6Thread.java:158)

re: Pod XT Live and installing line 6 edit

support@line6.com — Thu, 12 Nov 2009 23:11:17 GMT

Hi,

I've got a new laptop and trying to install Line 6 edit.

Windows Vista home premium.

During the install procedure, I get a msg at the end which says "unable to download the Java runtime environment".

I tried installing Java after this was done, but L6 edit still does not open.

I tried un-intalling L6 edit and re-installing, but still get the msg.

There are many, many posts to the forum about this issue, so many that I don't know what I'm supposed to do.

Please advise.

Thanks very much. This product rocks with my U2 cover band!

-Bob

No me funcionan los models packs en el POD FARM con mi POD XT Pro

support@line6.com — Sat, 14 Nov 2009 04:23:13 GMT

Tengo un POD XT Pro con todas las actualizaciones de los models pack y bass comprados desde hace tiempo. He instalado el POD FARM usando la licencia que compré del Gearbox plug-in y funciona pero no me autoriza a usar los extra models.

¿Cómo puedo conseguir que funcionen????

Pod 2 audio cuts out when in A.I.R. amp mode

support@line6.com — Wed, 11 Nov 2009 02:58:19 GMT

My POD 2.0 audio cuts out intermittently ONLY when in AIR- Amp mode (not when in direct mode). My Line 6 authorized service person suggested I reload the firmware to eliminate software issues before I bring it in for hardware troubleshooting. I downloaded the Motopod 2.54 file. I have updated Monkey and Line 6 Edit. How do I reinstall firmware through MIDI?

Reamping issues W/ PodXT Pro

support@line6.com — Sat, 07 Nov 2009 17:24:04 GMT

Hi there-

I'm attempint to capture affected trackes(S/P-DIF L&R) for RT performance/BU and a clean track for reamping which is coming from Unprocessed Guitar Out, but am having problems with my PODxt Pro sending a sample rate of 96k/24b through S/P*; When I set Digital Out to 48k, I get signal, but not at other rates. I've tried to sync to the host with 'Match SPDIF', and it doesn't lock. So I've attempted to achieve a lock by putting the input to SPDIF, with only inf. feedback loop when 48k is selected. no results with any other rate. My host session (interface driver) is set to internally clock at 96k. The interface is an M-Audio Profire 2626 (firewire, not that the connection is relevant).

The audio engine is Sonar8 producer. I do have POD Farm plugin, but latency is an issue until post-tracking.

Capturing the affected tracks arn't extremely critical, but would limit my options to capture & revert to my client's 'original' sound, since reamping at this sample rate (as well as time) is at issue, and jitter is introduced on the analog outs..

If you need more info, let me know.. Any help is greatly appreciated!

Thanks!

ToFue

pod xt pro 4 buttons innoperante

support@line6.com — Wed, 18 Nov 2009 09:11:41 GMT

hi all

i have a little problem with my pod

i have installed the lastest versions of the firware and all is upgraded

but the 4 buttons under the screne are innoperante i cant use those buttons, it's very very .......

Bass POD XT registration

support@line6.com — Sat, 07 Nov 2009 08:13:01 GMT

Hello

I bought the bass pod over 5 years ago and thought it was time to register it.

Unfortunately I foung out that the previous owner was still registered.

What is the procedure to undo the previous registration?

Thanx a lot

George Kakavas

I bought a podxt recently and was going to do some updates and it said it required a cd of somesort to complete the update. My podxt didn't come with a cd. Where can I get one so I can update and get some add onns?

support@line6.com — Sat, 21 Nov 2009 19:50:41 GMT

I bought a podxt recently and was going to do some updates and it said it required a cd of somesort to complete the update. My podxt didn't come with a cd. Where can I get one so I can update and get some add onns?

Blank Yellow Screen....most times

support@line6.com — Tue, 20 Oct 2009 22:55:55 GMT

About two weeks ago or so I noticed that sometimes when I flipped on my POD XT Live the yellow screen would light up blank; nothing else woudl come on. It happened more and more frequently since then and now that is all that happens. Except, sometimes the AMP, STOMP, and MOD pedals light up red as well.

I've tried everything (unplugging, different power outlet, starting it holding down SAVE and EDIT, etc.) I'm growing very frustrated because I have an audition coming up.

I contacted the only service guy in my area (Kansas City....really? Only one?) and he said if it as something that needs work it would probably cost $400 or so. Are you kidding me? That's more than I paid for the thing.

Somebody...give me the fix. Tell me how to fix this thing. I'm desperate....please!!!

De-Register problem

support@line6.com — Thu, 19 Nov 2009 19:48:00 GMT

Hey I just sold a XT Live to another guy and I want to de-register it from my name so he won't have problems when he goes to register. I tried using the option but it comes back with "there's a service attached to this device". I don't know if he has an account yet so I can't give you the user name of the buyer. Can you guys please de-register it from my list of stuff ? Thanks.

pod farm + podxt pro + win 7 64bit

support@line6.com — Fri, 16 Oct 2009 11:35:46 GMT

I have line6 pod xt pro and pod farm ;and I just installed windows 7 64 bit ultimate.
I downloaded:

pod farm 1.11
Line_6_Drivers_v3.4.3.8_Installer
Line_6_Monkey_v1.31_Installer
Line 6 Edit v3.02 Installer

1---line 6 monkey can not see my pod xt pro.
2---Line 6 Edit does not work
3---how can I put the License keys for pod farm?

Please advise

thank you in advance

info@3rdeg.com

have some problem

support@line6.com — Fri, 13 Nov 2009 00:25:25 GMT

I got bass pod xt live at 1years ago.

and I want to register. so I joined www.line6.com and downloaded monkey

I was entering sirial number but before owner had been enter sirial number I don`t know his phone number T.T

FBD2P5538005387

that is my bass pod xt live sirial

please check it

and while useing pod xt live, I think this is very good! I love use more line6 product thank you ^^

Line 6 studio ux2 question.

support@line6.com — Tue, 17 Nov 2009 18:09:18 GMT

Would I be able to use passive studio monitors with the ux2? Does it have an amp built in to [owere the monitors? Or will i just have to use powered monitors...?

Thanks

Brandon

Pod 2.0 and Floorboard

support@line6.com — Tue, 17 Nov 2009 00:39:52 GMT

I have been using a POD 2.0 for about two years now and love it along with the floorboard. The Wah stopped working -- no sweep -- so I took it to an electronics place in Rochester, NY -- worked for a short time. Now nothing. I bought a new Floorboard that was at House of Guitars last week. Again, no wah. Is it possible it's my POD that is causing this to happen? I find it unlikely that two floorboards, one fresh out of the plastic in a new package, don't work.... wondering if it's possible it's my POD 2.0.

PodXT USB Firmware Update

support@line6.com — Fri, 23 Oct 2009 16:23:24 GMT

I am the original owner of PoDXT SN:21SPD1H5250014583.

I have tried in vain to update via Monkey to USB Firmware 1.12 from 1.00.

I was able to update the flash memory to 3.01 but the USB firmware upgrade says that it completes but then I get this error:

"There was an error communicating with your device. If it is a USB device, try disconnecting then reconnecting the USB cable."

Error:(Code 8000900C) MIDI device timed out waiting for response."

Duh!

I have tried from both Vista and Win2kPro with the same results.

What's the dealio?

problems with FBV Shortboard recognition, and older product registration

support@line6.com — Mon, 16 Nov 2009 05:15:39 GMT

in trying to use my brand new FBV Shortboard MKII, 1 #1. the Windows [found new hardware]Wizard cannot find the driver # 2. Line6 Monkey can't locate the FBV Shortboard anymore [ the Shortboard is receiving power from the USB Cable, and Windows initially notes "FOUND NEW HARDWARE" but the Wizard can't locate theFBVdriver.

in going to the line6 website, i noticed that most of my line 6 equipement is not registered - i registered all of it by mail and on liune. when i tried to re-register the stuff. i was told it was already registered to someone else. about 1-1 1/2 years i had trouble with my password and i called you guys up and i thought we cleared all that up. it's all under the same email address . i swear there is so much trouble with the software\computer side of using your stuff, sometimes i can hardly get to the music

PODX3Live

support@line6.com — Fri, 20 Nov 2009 17:42:45 GMT

Hello,

I can't find anywhere to specifically address this issue. I'm thinking of selling my current PODxtLive and BassPODxt so I can get a PODX3Live. I just love the 'everything in one place' idea, with both guitar and bass as well as vocal options, and mixing and matching them, plus dual tone. But, you know all this, don't you?

What vexes me is not knowing, before I do this, whether I can use the Varriax input for ALL my Variax guitars. I've got the Variax700 Electric, Acoustic AND Bass guitars. Will I be able to plug them all in to the PODX3Live (Obviously, not at the same time)? If the answer is 'yes', then that puts me over the edge. Thanks for your time.

Geoff Ginter

Pod XT Live into Engl Invader 150

support@line6.com — Tue, 03 Nov 2009 18:25:23 GMT

Hey guys,

Well I bought my Pod around a year ago when I was playing a Marshall MG100HDFX - going through the FX loop I pulled a decent sound out of it. I have since upgraded to an ENGL Invader 150 (good lord, I cannot describe how perfect that head is!)

Now when I connect my Pod to my head (I've tried running it in the front as well as through the FX loop) it literally cuts my tone in half. The ENGL has amazing distortion, but even with EVERYTHING off (Amp modelling, Effects, Compression etc.) it completely destroys my tone.

Help! While my guitar sounds amazing through the head alone, and it's not the guitar (PRS Custom 24), but I miss my effects!

Cheers,

Tristan.

Can't register my used PodXT Live...

support@line6.com — Wed, 18 Nov 2009 21:07:25 GMT

Tried unsuccessfully to contact previous owner, please help!

it just stopped

support@line6.com — Tue, 17 Nov 2009 08:21:46 GMT

on my gig we set up and did sound check,the pod pro xt worked great like italwats did, so it was our turn in an hour so we waited then we got up to play. my guitar made no sounds so i turned it off then i turned it back on. the monkey did not show up or anything. the screen is just lit up, the tap button is on the clip light and so is the signal light is on. can you guys help me out i connected it to my computer to get it checkd out but the minkey on the computer says everything works fine, i also tried to save a bundle and that did not work it saud error. im really bumed out i have had this for years and now its doing this. i hope you guys can help me and have a great day, my name is roman and my email is synystersoloest@aol.com

Where is the Bassamps located in my POD xt LIVE?

support@line6.com — Thu, 19 Nov 2009 08:14:12 GMT

Hi,

I bought the bassexpansion bundle over internet, it must have installed right in my pod because... When I using Internet I have an "internetpc". I am downloading, save it on an USBmemory and then install on my MUSICPC wich is not hooked up with Inet. Now when I open Gearbox in my MusicPC I have the BASSbundle and can manipulate the sounds as with the guitarsounds, but in my physical POD xt LIVE I don`t see any of the BASSAMPS wich make it difficult to use the XT Live without a computor What am I doing wrong?

Best regards Micke S./Sweden

Already registered?

support@line6.com — Fri, 20 Nov 2009 09:26:51 GMT

Hi there, it turns out my second hand PODXT LIVE pedal is already registered... the seller has never used this pedal with a PC so has never registered the number online before. Is someone hacking my rego number? whats the deal?

hopefully you can help me out with this one

Thanks!

-Jordon

Greetings...

support@line6.com — Fri, 13 Nov 2009 20:23:01 GMT

I am looking for a solution that would allow me to have a solid, dependable, quality USB connection to my PC but also give me the most distance from the PC that I can get. The simplest thing would be to find some sort of USB Hub or USB extender that is 100% line6 compatible so I could have say a 6ft-8ft USB cable from my computer go to the hub, then the std. distance from the Hub to the Toneport. The idea is to get everything except the laptop off the stage but still use the toneport for Vocals & Audio output to the mixing board.

Has anyone any ideas on the best way to achieve this type of setup?

Im not receiving password resets!!

support@line6.com — Thu, 19 Nov 2009 20:49:07 GMT

Hi, I have another account Username: Gibbo47n which I think is linked to email account Gibbo47n@yahoo.co.uk. I have been trying to log in for the last week or so to download Variax Workbench as I have recently purchased a Line 6 Variax 700 Guitar, but unfortunatly I m having trouble remembering my password and Iv reset it several times but still I have not received an email with my password reminder to the above email. I have tried to re register myself and I have been successful but when Iv tried to re register my POD XT LIVE Iv been unsuccessful as it is currently registered with other username. Can you please advise me of what I need to do to be able to reset my password? I can supply other security information iif neccessary. Thanks

Bass PODxt Pro as an FX looped device

support@line6.com — Mon, 16 Nov 2009 03:52:44 GMT

I am looking at a Bass PODxt Pro and want to use just the rear connections as the FX unit via my Hartke amp FX loop. This may be knit picking but I wan't to use the Hartke 12AX7 preamp before I hit the PODxt. Is it possible to leave the FX loop out to the line in on the POD and send the processed signal to the FX return on the amp?

PODxt Flash Memory Installed Version Listed as "-" in Monkey

support@line6.com — Sun, 26 Apr 2009 14:33:17 GMT

Monkey says the newest version of Flash Memory is "3.01", but that my installed version is "_". The "Update Selection" button is greyed out. Instead of a Green Checkmark, or a Yellow Exclamation Point, there's a Grey Question Mark.

My PODxt version information lists "v3.01", USB 1.12.

I'm not sure if I have to do anything, or can.

Connecting POD 2.0 to the computer

support@line6.com — Fri, 20 Nov 2009 20:14:04 GMT

Hi.

I am new with all this. I bought a POD because I met someone that recently began playing electric guitar(a customer).

He told me that POD 2.0 was cool, because I could download effects and stuff.

Now I'm standing and not knowing "how" to download these effects.

The problem is not how to install the program or actually download the effects.

The problem is that I don't know how to connect my POD to the computer.

I tried using a jack cable connected to the right and left output slots in the POD and then

I used the other side of the jack and connected it to what seemed like the "line in slot"

to my sound card. It says Line In at the back of my cabinet. We are talking about a static computer.

I tried using that filemonkey software but it couldn't detect that my POD was in.

Should I use another software or am I doing it all wrong?

I also bought a stealthplug because I was told that it could help me to connect the POD to my computer

and edit the music.

I don't know how to activate my sound card to communicate with my POD. How do I do that?

Am I even writing the right place? All this is very confusing and I could really need some support from someone.

And I use windows XP.

I really want to download some metal effects or maybe some effects with Eric Clapton so it could be cool if someone could link a guide

that I need or at least tell me what to do :=)

Thanks in advance.

pod xt factory reset

support@line6.com — Sun, 13 Sep 2009 11:29:45 GMT

Hi.

Help wanted! I can factory reset pod xt.How made?Thanks

Not a technical question, but functional

support@line6.com — Tue, 17 Nov 2009 09:49:12 GMT

Hi,

I bought my Pod 3rd hand and have no receipt what so ever. I still would like to register. How can I do this?

Kind Regards,

Honestytwo

win7 support

support@line6.com — Fri, 20 Nov 2009 05:31:07 GMT

support for win7 cant seem to connect to podxt i think is a driver iss. thank you for your time in this matter

Pocket pod

support@line6.com — Thu, 29 Oct 2009 20:02:12 GMT

Hello i download in 2 mac computers Mac os X version 10.5.6 and also in a G4 and still not working what can i do i reinstall it and it same thing what can i do thank you for your help.

Error in reactivating

support@line6.com — Tue, 27 Oct 2009 14:39:40 GMT

On trying to reactivate my add-ons (after having to reinstall my software) I get the following:

"There was an error in determining which Add-ons you have installed (Code 80007506) The asset table in the hardward is corrupt"

Any ideas?

Trouble with POD 2.0 MIDI connection...

support@line6.com — Thu, 19 Mar 2009 07:01:25 GMT

Ok, so I've had my POD 2.0 for about 2 years now and I just found out that it's possible to connect it to a computer and download custom tones. My problem is that I cannot find a MIDI interface cable that gets the job done. I went to Guitar Center (where I purchased said POD) and asked if they carried the correct cable to which they replied, "I don't know, none of us has ever done that before." I've been to every other music shop in Spokane and I'm amazed to find that none of them knows anything about my POD 2.0 or how to connect it to my computer. I bought a cheap Chinese (the packaging literally has no manufacturer logo or name on it whatsoever) MIDI to USB cable from a local cable shop and it doesn't work at all. If anyone knows of a MIDI to USB cable or other interface setup that actually works I would very much appreciate the input. Oh, and I'm running Windows Vista 64 on my PC. Please don't ask why... I ask myself that very same question every time I start up my machine and I don't have an answer yet.

Thank you.

Expansion packs mutually exclusive?

support@line6.com — Tue, 10 Nov 2009 15:11:26 GMT

For the Pod XT Live, I purchased a special a while back for the Collectors Classic and the metal shop. Installed those OK and they worked fine. Later, I wanted the bass pack, and noticed it was cheaper to buy the bass pack with the collectors classics, than it was to just buy the bass pack. When I installed that, the metal shop rigs dissappeared. Is there a way with what I've purchased to get all three to work together? Thanks.

FBV2 Troubles

support@line6.com — Tue, 10 Nov 2009 06:09:10 GMT

Does anyone have a schematic?

I really can't afford to send it in, and I have the skills and tools to fix it my self. but i need a schematic.

Thanks in advance.

How do I Register a second hand POD 2.0

support@line6.com — Tue, 17 Nov 2009 11:07:56 GMT

Hey,

Just got a POD 2.0 from eBay.

If I cannot contact the original owner, how can I register it under my details?

cheers,

Andy

PODXT FVB Shortboard wont switch banks??

support@line6.com — Thu, 12 Nov 2009 22:00:48 GMT

Hi, I have a pod xt and a fvb shortboard. When I plug in the fvb shortboard the board lights up to channel one, but will only switch the banks DOWN and when it does lets say switch to bank 34 it starts blinking and I cant change from patch 1 to 2 and so on. the fx loop doesnt light up either... but the fx switches seem to still turn the FX on and off.

if you try to switch the banks up nothing....if you switch down it just starts blinking the channels.

The unit hasnt been dropped or banged around at all in fact it has a case ...

I have switched RJ45 cables ...no diffrence

I have used a 2 channel footswitch in place of the fvb shortboard ...it changes the banks up and down fine.

Is there some kind of calibration I can reset or have any of you heard about an issue like this.

Thanks for your advise.

registro de usuario

support@line6.com — Thu, 19 Nov 2009 07:27:37 GMT

Compre un POD xt Pro pero nunca lo di de alta en internet, (por falta de tiempo, etc.) No. de Serie 21PPX1P5731002043.

lo quize registrar pero me dice que ya esta dado de alta por otro usuario sindo que yo lo compre directamente con un distribuidor autorizado de Mexico Hemes music estoy buscando la factura de compra que si la tengo.

Solo quiero saber si despues de 2 años de haber comprado el equipo lo puedo registrar para poder descargar gratis el software para editar efectos y las galerias.

Muchas gracias por su atencion.

probleme maj

support@line6.com — Fri, 20 Nov 2009 11:05:40 GMT

je voudrai mettre mon pocket pod en version 1.01 mais quand je lance le logiciel line 6 mokey je n'ai pas la ligne Flash Memory (voir screen shot)

Pourtant mon pocket pod est bien en version 1.00... que faire?

PODXT Line 6 Edit Java Error Under OSX 10.6.1

support@line6.com — Mon, 28 Sep 2009 23:53:23 GMT

I received the following error when attempting to run Line 6 Edit (POD XT) on my Mac, OS X, 10.6.1 Snow Leopard ..........

An exception was caught.

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

App info: Line 6 Edit 3.01 release - build 99 - Fri Oct 27 14:49:03 PDT 2006

Date: 9/28/09 6:54 PM

In thread: Thread[main,5,main]

OS: Mac OS X (10.6.1 i386)

Java VM Version: 1.6.0_15

Stack trace:

java.lang.UnsatisfiedLinkError: cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash()V

at cmn.l6java.utils.L6EmbeddedUtils.nativeHideSplash(Native Method)

at cmn.l6java.utils.L6EmbeddedUtils.HideLauncherSplash(L6EmbeddedUtils.java:39)

at line6editbase.app.L6EditorApp.Start(L6EditorApp.java:459)

at line6editbase.app.L6EditorApp.access$200(L6EditorApp.java:42)

at line6editbase.app.L6EditorApp$L6ELauncherBootstrap.OnLaunch(L6EditorApp.java:310)

at cmn.l6java.app.L6App.Launch(L6App.java:194)

Please advise what I must do to successfully run Line 6 Edit under this version of Mac OS X Snow Leopard.

Installation Problems

support@line6.com — Sat, 21 Nov 2009 11:33:19 GMT

I have had 2 problems:

1. The following error message appears at install: "The system extension " / system / Library / Extensions / Line6Audio.kext" was installed improperly and cannot be used. Contact the product vendor for an update" I have attempted instal 4 times with the same result

2 The software does not detect the hardware. When the USB is connected a message appears: "You need to restart your computer hold down the power button.." On restarting the computer and reconnecting the USB the message is repeated.

POD Question

support@line6.com — Sat, 14 Nov 2009 18:58:06 GMT

I own a POD that I upgraded with the newer EPROM (It reads pod 2.0 when depressing the manual button and turning on the power and then it goes to 3, so I guess it is 2.3 software?).

I have a Line 6 Floor Board as well. These were purchased at different times.The POD case has a plug -in that is marked "PEDAL" so the POD should not be compatible?

My dilemma is that the board does work in every aspect except that I have volume issues with some selections. That is to say that some selections are very loud and some require volume increases through either the guitar or the floor board pedal. Many are the same volume however.

Would the board not work at all or is it possible that it could function "partially" as in the volume issue?

What would you suggest I do if I need to replace one or both of these components?

I am not a gearhead so could use some very simple advise on the above question as well as the best way to connect the POD to my Peavey Classic 30 amp & 112 extension cab.

I would greatly appreciate your help.

Thanks!

Pod 2.0 - Noise every time "Tap(Hold)" button flashes

support@line6.com — Wed, 04 Nov 2009 13:42:14 GMT

Hi, just a quick question. When the "Tap(Hold)" button flashes, there is a pulsing noise with each flash. Is there a way to eliminate that sound? The POD Version 2.0 has been great in the studio apart from that noise that is very distracting during quiet parts, so much so, that it makes the unit unusable. Thanks in advance for the reply and, hopefully, the solution.

Sincerely,

Line 6 Edit won't run due to Java

support@line6.com — Sat, 10 Oct 2009 15:32:49 GMT

I have Java 6 update 16 (latest) on my computer. Line 6 Edit won't start and tells me "Could not find valid Java runtime!". Any idea why and what I need to do to fix it?

POD effect pack addons

support@line6.com — Mon, 09 Nov 2009 22:06:14 GMT

Just a quick question :

I own a POD XT and use that for recording through a splitter to get both a clean and a distorted signal into ProTools.

Recently I purchased PODfarm, in order to be able to re-amp my clean tracks within ProTools. And it works just dandy.

So the question is : If I buy, say the Metal Shop effects pack for the POD XT - will this pack also be available in PODfarm, or do I have to purchase the pack twice?

- sorry if this is a silly question, but it occured to me that the addons you buy, register to the hardware you choose, so I was just wondering.

Thanks in advance,

/Nick

bass & 6 string

support@line6.com — Thu, 05 Nov 2009 05:36:36 GMT

I need to switch quickly on occassion from bass to 6 srting electric. Is it possibe to install a few basic 6 string patches on my bass pod XT Live. i would like to just unplug my guitar cable from one instrument to the other and select an appropriate patch on the pod. I'm playing direct through the PA - no amp on stage. Sound tech would be resposible to adjust each instrument for the mix. I monitor through aviom.

Can my XT Live do this?

support@line6.com — Mon, 16 Nov 2009 23:21:15 GMT

Pardon me if this is a really dumb question. I have a laptop running Windows XP that is replacing an old desktop computer. I will be installing some music recording/editing software (vendor not yet selected - but something very easy to use). I plan to connect my drum machine and synthesizer module to the computer and control them with the software. My old desktop had a game controller to MIDI port that was used to send MIDI information to these devices. My laptop only has USB. I was going to purchase a USB-to-MIDI adapter. But it occurred to me, can I just use the XT Live to act as the USB-to-MIDI adapter? That is, can I connect the laptop to the XT Live via USB and then chain the drum machine and synth to the XT Live via its MIDI ports?

PODxt Live & Windows 7

support@line6.com — Tue, 20 Oct 2009 11:56:02 GMT

Are both the software (Gearbox) and PODxt Live drivers available for Windows 7? If so, are there any known issues?

Thank you.

No sound on new POD UX1 Windows vista PLEASE HELP!!!

support@line6.com — Sat, 15 Aug 2009 19:47:21 GMT

Hey guys,

So i just bought this POD UX1 yesterday and I installed it last night, it was all set up and everything looked good. I plugged in my guitar to the instrument input, but i had no sound. I think I am getting an audio signal, the green bars are going up when i play a note but there is no sound whatsoever. I have the Line 6 POD farm disc in, it is installed and everything, i have the USB cord attached from the POD UX1 to my computer. If someone could help that would be awesome.

Thanks

I am getting very frustrated i bought this thing for 210$ and it doenst even Freakin work...

POD xt shows: USB: 0.00 ???

support@line6.com — Wed, 18 Nov 2009 10:45:27 GMT

Hello

My pod XT shows the informations (when I push Tuner and select the informations)

PODxt: 2.01

USB: 0.00

ESN: 0000000

And in fact I can't connect it to my pc with usb...

Can anyone help me?

Pod XT Live Not Recognized by OSX 10.5.8 anymore! USB? Drivers? Help!?

support@line6.com — Mon, 02 Nov 2009 19:13:17 GMT

I'm running Mac OSX 10.5.8. I've been using my pod on here for years without any issues or problems. Then all of a sudden the other day it just stopped recognizing the device. I plug it in and the dot doesn't light up on the pod nor does any of the line 6 software see the device.

Here's what my pod reads currently:

POD XT Live v 3.01

USB v 1.12

ESN 01423967

I've updated the drivers, uninstalled and reinstalled everything I can think of, tried different USB ports and cables... and still nothing. Has anyone else had this problem and figured out how to fix it??

Please help, I have to update several of my tones for an upcoming show. Yikes!

Thanks!

--Hawky86

Need help to register a used PODXT Live

support@line6.com — Wed, 18 Nov 2009 22:06:14 GMT

I bought a used PODXT Live (like many) on EBAY February 2, 2008. Today I tried to register it but it is registered to someone else (probably Steve Bruening). The serial number is 21FPD1P5535003806. I have a copy of my Paypal receipt which I can sendt. Can you help me Line6***?

Thank you
Richard.

Original Bass Pod

support@line6.com — Fri, 20 Nov 2009 19:36:47 GMT

I have an original Bass Pod and I would like to update to the latest software version, and bring this baby up-to-date. What do I need to do?

Voltage for podxt live

support@line6.com — Thu, 12 Mar 2009 16:47:45 GMT

the ac/dc power converter for my xt live says that it is rated for an input voltage of 100 volts. Is that right? Nothing is wired at 100 volts.

Feedback problems with POD

support@line6.com — Sun, 08 Nov 2009 16:07:56 GMT

For both my solo and gain sounds I have a lot of feedback trouble. I need to have the noise gate settings very tight (decay around 15% and threshold 15%). I use the Spinal Puppet amp, but i dont have more than1 o clock gain.

I think most of the noise comes from me using the screamer stomp box. I need this to get the sound I want and in the start I had it set on 100% for both level, gain and tone. Now I have reduced both to 60% but still it makes a lot of noise. And when I say noise, I really mean it. It's pretty extreme. If I just turn of the noise gate the POD immediately starts to make a lot of noise even if I mute all the strings...

I think it's very strange I need to use this much noise gate because it reduces all sustain... Honestly it's my only problem with the Pod.

What is the reason for all the noise? Can it be reduced somehow??

Good Acoustic Tones on PodXT

support@line6.com — Sat, 21 Nov 2009 14:51:21 GMT

I'm looking for some good acoustic guitar tones on my PodXT. Any suggestions?

pocket pod install problems windows xp

support@line6.com — Fri, 20 Nov 2009 16:07:03 GMT

When I connect my pocket pod windows says found new hardware line 6 but then says it can't install.

Also I have installed line 6 monkey but when it starts up it does not list pocket pod in the hardware list.

How do I resolve?

Thanks

Unable to Download Java Runtime Environment

support@line6.com — Tue, 27 Oct 2009 23:18:36 GMT

I just re-installed Line 6 Edit on my new PC and I get the error message 'Unable to download Java Runtime Environment' Can you help?

Greg

POD Studio UX2 drivers - ASIO vs WDM question

support@line6.com — Sun, 28 Jun 2009 18:15:05 GMT

I recently purchaced my first Line 6 product, the POD Studio UX2. My current recording set-up includes: a Dell running XP (SP2) / M-Audio Delta 1010 / Sonar 5. I have spent many hours over the last few days trying to get everthing working together and my question is about UX2 drivers.

Here is a description of what I have figured out so far:

When I have the driver mode in Sonar set to ASIO I can enable the drivers for 1 sound card at a time. As a result I can use either the Delta 1010 OR the UX2 but not at the same time. In this configuration (i.e., the UX2 using ASIO drivers) the UX2 will record with a bit depth of 24 and it supports a sample rate of 48000hz.

When I have the driver mode in Sonar set to WDM, I can enable both the Delta 1010 AND the UX2 but when I do this, the whole project is reset to a sample rate of 44100Hz.

My question is this:

Do the WDM drivers for the for the UX2 support a sample rate of 44100Hz? I am assuming they do and I am just missing something obvious.

Thanks in advance for any help,

Dave

pod xt display goes blank (unable to view settings)

support@line6.com — Sat, 21 Nov 2009 19:16:45 GMT

My pod xt display works fine then goes blank then works again then goes blank and so on.

It is very frustrating. What can I do?

POD XT Live question

support@line6.com — Fri, 03 Jul 2009 23:55:38 GMT

Ok I am new to this type of effects system. Basically when hooked this up to my amp it just sounds like garbage. I tried following the instructions but no matter what I do these effects are just horrible. I have a line six spider III amp, clean channel is set, etc.. I remember back in the day when you hooked an effects unit into your amps effects loop it sounded great, nothing major to do but with this it is not the case. Any help on hooking this up right and setting it properly would be appreciated. At this point all I can say is because of my ignorance with this stuff, I am not very happy with the unit.

POD 2.0 connection to computer = PROBLEM

support@line6.com — Thu, 13 Aug 2009 13:40:36 GMT

Hello !

So, i have a problem connecting my POD 2.0 to my computer. It just simply doesn't work !

When i open Line6 Edit i have absolutely no device to choose from, and when i open Line6 Monkey the POD 2.0 isn't listed...

Here's what i have tried already and the gear i'm using:

First i bought a Midi to USB cheap cable (Swissonic). It didn't work, so i sent it back and got a M-Audio Midisport UNO, which is more expensive, and should work properly.

I have tried different versions of Line6 Monkey and Edit. None of them work. I have installed both the Midisport drivers from the CD and from their website (not at the same time ofcourse) and it doesn't work.

I have tried plugging the cable with the POD turned off and turning it on on the device choice page, or doing it with the POD anlreay plugged in, neither worked.

I have downloaded the Flash thing but i don't know where to put it or how to open it.

There's simply no way to make it work

iLok License

support@line6.com — Thu, 19 Nov 2009 15:04:24 GMT

Hello-

When I purchased my X3 Live, I was told that I would eventually be able to get a free iLok license for Pod Farm. I've had it over a year now and haven't been able to find a way to get the iLok license deposited to my account. Any help would be most appreciated as the X3 does not work well with my Logic / 002 rig.

Thanks-

Chris Arias

Atlanta, GA

404-964-6231

pod 2.0 eprom update

support@line6.com — Sat, 21 Nov 2009 17:32:12 GMT

Hi! Is there still avaliable the Eprom update to POD 2.3 or 2.54?

If so, How can I get one? i´m in spain

thank you very much

hello, my pod xtlive is broken!

support@line6.com — Sat, 21 Nov 2009 21:39:06 GMT

Hi...i believe I am still under warranty...hope so anyhow...the place where I plug the power source into snapped into the unit...can anyone help? Thanks so much, Jeff

Floor pod adapter

support@line6.com — Fri, 20 Nov 2009 23:26:08 GMT

Hi, i just bought floor pod product. When i checked adapter it says 120V 60Hz but in my country we use electricity 220V at 50Hz rate. My question is can i use a simple 220V to 120V converter for adapter or should i buy a new adapter with compatible 50Hz?

pod 2.0 en USB / MIDI

support@line6.com — Sun, 30 Aug 2009 16:48:05 GMT

Bonjour,

J'ai un POD 2.0. Je souhaite le connecter à mon PC pour utiliser Line6 Edit.

Ch'ai téléchargé Line 6 EDIT et MONKEY.

J'ai acheté un câble USB / MIDI.

Le câble est connecté et reconnu par le PC, sans problème.

Mais Line 6 Edit ne reconnait pas le POD 2.0, alors que MONKEY assure que tout est à jour :

que faire ?

Merci d'avance.

pod express

support@line6.com — Mon, 22 Jun 2009 03:48:02 GMT

My pod express seems to crackel on most settings Crunch,rock,metal but only on the low E string

9th,and 10th fret,Im Playing a Strat.How can this be fixed.I have the paper work but no longer have the box

only had it a few day store wont replace it(Guitar Center NYC 14St) Please Help......Stringman43

Line 6 POD xt live RESET

support@line6.com — Sun, 19 Apr 2009 10:37:23 GMT

Hi,

I've just wnat to know if is there a way to reset my Line 6 POD xt live to restore its default configuration. I didn't make a backup when it was new.

Please tell how to do it.

Gerard

Question regarding L6 Edit and Java 5.0

support@line6.com — Tue, 27 Oct 2009 00:41:04 GMT

After accidentally deleting Java 5 today I had to re install Edit to get it back. However Sun no longer will be supporting Java 5 as of Oct 30 and the Edit install program could not find it on Sun's website.

I manually installed it from an achive on their site and everything is good. However....

My question is this.... Is Line 6 going to release a new version of Edit that runs on Java 6 exclusively or are we going to have to keep Java 5 which is no longer supported, and won't have security updates, opening us up to risks?

Floor pod just for effects???

support@line6.com — Mon, 27 Apr 2009 20:36:18 GMT

Hi, I'm wondering if it's possible toto connect the floor pod infront or in the effects loop of an amplifier, however i only want to use the modulation, delay and wah effects, and want to bypass the amp modelling. I'm already happy with the basic sound of my amp and hence don't want the amp modelling of the pod to effect this, but would find it very useful if i could utilise the floor pod for effects alone. Is this possible? If it is how would i go about entering this mode?

Thanks very much.

A request for the tech support people

support@line6.com — Wed, 08 Apr 2009 20:43:49 GMT

Hi,

http://line6.com/community/thread/1705

Making a new thread for this as required for you to notice this and to get things running again. So, how do you plan to get on with this?

Again, please ask me any stuff you need to know... I hope we can get this sorted out.

MY USED POD IS ALREADY REGISTERED UNDER SOMEBODY ELSE AND I have no receipt

support@line6.com — Sat, 21 Nov 2009 21:39:08 GMT

I need to register my podxt but I bought it used. I have no receipt and no way of contacting the previous owner please help. I need to get some downloads and buy some new add ons!

Can't run Line 6 Edit v3.01 on my new iMAC snow leopard... java error?

support@line6.com — Wed, 30 Sep 2009 14:07:30 GMT

I have donwloaded and installed the latest 4.2.4 audio driver you mention. I have installed Monkey 6 and it works. But line 6 Edit v3.01 will simply not run... I get the same java error as I saw reported on the line 6 snow leopard user group .

Any help would be appreciated.

Thanks

Claude

USB Connection problem with POD XT Live

support@line6.com — Thu, 26 Mar 2009 00:15:39 GMT

Hello my friends!

I've bought my XT Live 2 days ago (it's used). All good, except PC - connection. When I'm trying to connect device into PC USB port, the system error message is occured (it is a windows usb connection error dialog-message "device is not installed... etc.. device can not be installed, because it works incorrectly..." ). Monkey and XT Live drivers are installed (following all steps). I've tried to re-install all possible drivers, re-connected usb-cable into all ports, trying it on other PCs - nothing has changed. And another funny question. If I have installed XT live drivers, why Monkey says, that it's not installed?.. may be because installing is beginning since the system detect not "Unknown device", but POD XT live... I dont know... Help please..

Thoroughly Confused by Java Error Problem!

support@line6.com — Sat, 06 Jun 2009 03:23:50 GMT

Ok- Got a POD 2.0

Got myself a new USB/MIDI interface thingy (& am just starting to learn how to get custom tones with it)

Apparently, there's some Java "bug" that interferes w/ Line 6 Edit?

I'm a noob at all this. I Googled the problem & found like, 3 different suggestions on what version of Edit or Java to download.

I am totally in the dark & have downloaded/confused the heck outta myself now.

All I know is, I use XP, I have Java (jre 1.6_07) though I also see jre6, j2re1.4.2_03, jre1.5.0_04, and jre1.5.0_11 in the folder too.

What on earth am I *Supposed* to have to get this to work & How??

Thanks.

**Update**

Seems I may've solved the Java problem. I read elsewhere that I had to uninstall java, reboot, then run Line 6 Edit & it'd put it the correct version of Java itself.

Well, though now I do see the Line 6 Edit menu come up this time, I cannot configure my POD.

Says no MIDI device detected.

Now what??

I had JRE 6 before installing POD editor- now its gone- why?

support@line6.com — Sat, 31 Oct 2009 22:26:06 GMT

I installed your latest editor for first Pod Pro- the one that says "Supports JRE 6"- well I had jre 6 before installing the editor- but during the installation line 6 installer said I must be connected to install Java 6- what the hell!? I already have JRE 6!!- now after the install is done it wont open because Line 6 editor says it can't find Java6- I looked at my program list and sure enough I cant find it either- why is this software so problematic?? Why cant it tell that I laready had Java6- this is a huge waste of time to use a valuable feature of my Pod- I cannot use my POD compression with any effect unless I use this software- so I need it to work.

pod xt live to speaker cabinet?

support@line6.com — Fri, 25 Sep 2009 03:33:00 GMT

hey,'

I am going to build a speaker cabinet. Just a little one not a full stack or anything. Is it ok to run the podxt live straight into the speakers cabinet and not through an amp first since the podxt has amp models and preamp stuff digitally built in?

thanks

P.O.D. 2.0 and FBV2 don't work together!

support@line6.com — Sun, 15 Mar 2009 12:58:42 GMT

Hi!

I short time ago I bought a second hand P.O.D. 2.0.

A week later a bought a FBV2 as thougn it might be usefull while recording/playing to

switch between the channels in a bank.

I was in the opinion that the FBV2 would work like on a Spider or other Line 6 amplifier:

With the left button you can switch down and with the right button you can switch up.

However, doesn't work that way on a P.O.D. 2.0, both buttons only switch down.

I checked the P.O.D. 2.0 and all software is up to date.

I checked with shop where I bought the FBV2:

The FBV2 works well on a Line 6 4-channel amp: Up and down

We also checked the FBV2 on a P.O.D. 2.0 from stock: Same problem, only switching down.

Maybe Line 6 people can confirm if my conclusions are right and if this is going to change in future!

Line 6 Edit 3.02...where is it?

support@line6.com — Sun, 27 Sep 2009 07:18:23 GMT

Hi guys. I've been having troubles to install d the line 6 edit because of the java issue. Now, i read that the problem could be solved if i install the 3.02 of the edit version, but where is it? I can' t find it...i have the 3.01 ans says thats the latest version.

Thanks,

Andrei

POD XT Mount

support@line6.com — Fri, 06 Nov 2009 09:43:39 GMT

I recently bought myself a POD Mount, one of these:

https://www.globalfulfillment.net/gfsnet/line6/10Expand.aspx?ProductCode=98%20POD%20MOUNT

Whilst I love the product in theory, in practise the rubberized pins that push into the holes on the POD don't seem quite big enough. There is a bit of friction when you push them in, but if I pick the POD up without supporting the Mount, the Mount instantly falls away under its own weight. I presumed the rubber pins would fit more snuggly than this so that the POD would be a little more securely attached to the Mount. So I wondered what your opinion is on this and - if you think it sounds faulty - whether I might be able to get four more rubber pins to try out with the Mount?

Also, I understand that you can use screws to attach the POD to the Mount. Should the Mount have come with some screws (mine didn't), or is it up to us to source them? If it is up to us, do you have any details about what type of screws need to be used - in terms of diameter, and more importantly length (I don't want to use screws which are too long and end up interfering with or breaking the PCB or electronics inside).

I would really appreciate any help on this

Many thanks

Max

My serial number was registered...

support@line6.com — Fri, 20 Nov 2009 13:43:07 GMT

Hi,I have a POD XT Live,and I found my serial number registered already.I lost my purchase receipt,but I have a servicing receipt.Anyone can help me with this issue??

NEED HELP! how to record with pod 2.0

support@line6.com — Sat, 18 Apr 2009 22:18:52 GMT

hey,

just got a POD 2.0.

I have an M-Audio MIDISPORT uno USB - Midi convertor

im trying to use either Reason 4 or Fruity Loops 8 to record

how do you record with the POD by connecting directly to a computer if it is possible?

pocket pod presets volume levels

support@line6.com — Fri, 20 Nov 2009 15:09:56 GMT

Just got a pocket pod and I'm a bit disappointed that the volume levels between presets vary widely. SOme are very faint and others are so loud that the level is uncomfortable even with my little 15 watt amp turned right down.

Why are the levels so varied across presets and how can I even them up?

Thanks

Necesito los drivers del PODxt Live.

support@line6.com — Sun, 22 Mar 2009 09:28:53 GMT

Hola,

Llevo un par de semanas intentando bajarme los drivers de la PODxt Live de la página de line6 y no funciona.

Tengo el cubase y los necesito para hacer funcionar la pedalera con el PC.

Por favor, indíquenme como puedo conseguirlos.

Un saludo.

Need Software for POD 2.0

support@line6.com — Sat, 29 Aug 2009 16:35:50 GMT

Hello,

I recently bought a used (but still new this year) POD 2.0. Because it was used, it didn't come with any drivers or software and I can't download them from the software downloads page. Please send me a download link for the drivers and POD Farm software.

Thanks!

Sync Podxt Pro with logic

support@line6.com — Wed, 01 Apr 2009 08:51:06 GMT

Been trying to do this since the podxt pro came out. There is documentaiont about midi I know, it's over my head. Adding effects post is not fun, feels dry. I'd like to record more, being able to sync my tempo will save the day. The day is almost over. If there is anyone out there that can assist it would help me to acheive one of the few tasks I would like to achive. Simple, few, a tempo sync with my pod.

Sync Logic With Line 6 Pod XT Pro, trying to solve this for years

Rating

Options

TedLogic

Feb 26 2007, 07:18 AM

Post #1

Sonik Warrior

Group: Members
Posts: 298
Joined: 19-December 04
Member No.: 7,793

I started using Line 6 when I first started using logic, that was when I registered here and I started trying to find how to sync my guitar effects with logics tempo. I think I have found clues to get me to where I want to be. Seriously, I will dance in the streets when I get to have my rifts sound tight while recording.

QUOTE

Here's another option. I threw together a little Javascript routine that calculates the LSB and MSB values from BPM. All you need to do is enter the BPM of your sequence, make a note of the CC89 value and the CC90 value and enter those at the beginning of the sequence. Should work provided you have set your delay/mod in the patch to lock into a tempo note value.

JackReacher

Javascript Routine

I need to find info and and work on setting up the delay/mod patch. If this is concerning using the environment sorry about posting it here, but it will help make Logic breath. So if your familiar with the proccess or have and pointers on area of research let e know please.

Ty :-)

here is another link I found some info, I am confused if i need to send a beat to the pod or do i have to send cc values, confusingpod sync info.

This post has been edited by TedLogic: Feb 26 2007, 07:24 AM

http://community.sonikmatter.com/forums/index.php?showtopic=35224&pid=209793&mode=threaded&start=#entry209793

it would be great.

Line 6 Edit Problem with Mac OSX 10.5.6?

support@line6.com — Mon, 20 Apr 2009 10:09:18 GMT

I have noticed a problem with Line 6 Edit and my Mac OS.

Up until very recently I was able to access the online library by clicking on the blue button in Line 6 Edit Tone Locker. Every time I try it now Line 6 Edit crashes.

I'm running Mac OSX 10.5.6 and Line 6 Edit 3.01. This problem is on my iMac G4 and my Powerbook G4.

Has anyone else had this problem?

how do I reset to factory presets

support@line6.com — Thu, 30 Jul 2009 23:37:33 GMT

how do I reset to factory presets???

Pod xt Live unit

I just sold it..

Do I need to unregister it???

pod xt 1 mono pa speaker?

support@line6.com — Tue, 13 Oct 2009 00:52:19 GMT

this post is elsewhere. i was hoping to email line6 but i'll post this here:

hi,

i have had my pod running straight into a 15" pa speaker with no amp inbetween. the signal is coming from the headphone socket. i use it for low volume practice. the speaker is 8 ohm. am i ok to do this?

the signal from the other outputs is not powerful enough. i currantly have a mono cable from the headphone socket to the pa speaker is this a normal mono signal in this case? thanks.

:) Test your ears: PodXT or Roland COSM? ANSWERED!!

support@line6.com — Sun, 29 Mar 2009 05:10:43 GMT

I just put 2 relatively new songs in my music website: "Through the Forest" is on top, and "Going To Do", which is the next one down. One song has Roland COSM amp models for guitar and the other song has PodXT on the guitars. One song has Bass PodXT on electric bass and the other song has all Roland effects on electric bass. Your job, if you wish to accept this assignment, is to figure out which devices go with which songs. Whoever gets the most correct will get the next Virtual aardvark Golden Ear award. President Obama is counting on you! (then again, maybe he is practicing his bowling right now). Please tell me how you like these songs and how they can be improved! Here is the link:

http://www.soundclick.com/bands/default.cfm?bandID=224436

pod 2.0 settings

support@line6.com — Thu, 12 Nov 2009 20:16:37 GMT

Hey. I bought pod 2.0 and i"m learing "how to use". I wuld love to conect it to my pc, but i would need MIDI to USB cable if I"m not wrong? Enyway I"m looking for settup "in writing". Like :

Comfortably Numb (solo):
noise gate- on
Drive-8
Bass-4
Middle-4
Treble-6
Chan Vol-10
Reverb-0
Tweak Effect-3
Amp Model-Brit Classic
Effects-Delay/Compressor

So enyone know any page with this settups? (or if it"s possible to open patch with some program and look "how it is made"?)

How do I turn on the wah without skyrocketing the volume at the same time?

support@line6.com — Thu, 15 Oct 2009 00:58:44 GMT

I have a feeling that this is a really simple issue and I feel a bit dumb for having to ask, but how do I turn on the wah without sending the volume sky high at the same time? As I push on the food pedal to the toe position, to try and click on the wah, the volume increases. Once the wah is on, the volume is at maximum. Any suggestions? Thanks

"Cannot lock to input" message although I am connected by S/PDIF

support@line6.com — Thu, 19 Mar 2009 02:32:45 GMT

I am trying to connect to my MOTU traveler interface via S/PDIF, but can't seem to get any input signal to it. Under the I/O & Dig select menu I chose to match S/PDIF in, but when I press it twice for the "what are you connecting to?" screen, it does not let me choose anything other than studio direct, and there is no option for fx loop or digout. Dest is all that appears but I can't change it. My MOTU interface appears to be set up and working properly. Any help would be greatly appreciated.

acquiring licence code

support@line6.com — Sun, 08 Nov 2009 22:05:10 GMT

i am trying to purchase a licence code for power pack on line and when i give the cvv code nothing happens. any idea? i will apreciate your help

Pod 2.0 gone haywire

support@line6.com — Mon, 22 Jun 2009 09:36:51 GMT

My POD 2.0 seems to have gone crazy.

First thing that happened was that tones kept disappearing. Preset 6B which I like a lot would just transform itself into a clean tone, nothing like the preset.It would then come back but now won't any more. I've done a re-set & all the presets have changed. Some seem to have acquired more dirt but most of them are just clean and the 6B I knew & loved seems to be gone forever.

Second problem - the buttons on the POD don't seem to be functioning properly. If I modify a tone, the values I set using the buttons aren't correct if I check via Line 6 Monkey & my computer.( Yes I did syncronise before checking ! ! ) For example I set treble at 3 using the button on the POD, I find it's say at 70% on my computer screen. All of the buttons seem to have this problem.So if I set a tone using the buttons it's all wrong & not the same as if I set it using my computer.

Third problem - using my POD as a front end to my amp, it has developed crackles & hisses - but not through the headphones. If I unplug the POD the amp stops crackling.

I noticed that I had accidentally connected the amp to the right output on the POD instead of the left. Have I blown something up by doing this ? ?

What can I do to get my POD working properly again ?

Expression pedal has ghost wah issues

support@line6.com — Wed, 01 Jul 2009 01:42:40 GMT

I've got a Pod XT Live, (which, btw, I got as a b-stock from zzounds.com) and whenever I have the pedal set to wah as the primary function, it will turn on and off during random times. Sometimes it just flickers on and off, kind of like the tuner pedal. In addition, when volume is the primary function, it rarely works. I'm thinking that the two issues are connected, but I'm not sure exacty how.

I was wondering if anyone else had this problem, or if people knew how to fix it. I've thought about sending it in to get fixed, but a) I'm not sure if a B-stock is still covered by warrenty, and b) I'd rather have it close by. Because it's my baby.

Monkey will not load

support@line6.com — Mon, 24 Aug 2009 04:41:56 GMT

I can stare at this all day and night and it won't go any further. I uninstalled all my software and tried reinstalling monkey and guess what? I worse off than I was before. Now I can't even use the gearbox plug in.

Win Xp up to date.

P4 2.4ghz northwood

ASUS p4pe

1gb ram PC2700

WD ata100 40g C:

wd 250 SATA

Now what?

POD X3 Live - Scrolling through presets by itself

support@line6.com — Tue, 13 Oct 2009 07:21:47 GMT

I just recently got my POD X3 back from repairs now everytime I'm playing a song the pod just scrolls through all the presets and keeps on going over and over again eg:

1A 2A 3A 4A etc etc

How do I fix this problem?

MIDI Mobilizer for Apple IPhone and IPod announced

support@line6.com — Tue, 09 Jun 2009 07:37:14 GMT

Line 6, Inc. and D'Addario announced today at Apple's Worldwide Developers Conference the development of the MIDI Mobilizer™, a portable Musical Instrument Digital Interface (MIDI) device, and Planet Waves Rig Remote™ iPhone software for use with Apple iPhone and IPod touch® using OS 3.0.

Read the complete info so far here

http://www.vettaville.nl/news.php#941

Floor Pod Plus making static/printer noises.

support@line6.com — Sat, 09 May 2009 04:11:27 GMT

I just got a Floor Pod Plus the other day, and when I first started it up, whenever I had the dely on, it'd make this annoying printer/static sound every few seconds. Is there a fix to this or is my product defective?

How can I record both the wet and dry output of my PODxt to my DAW?

support@line6.com — Wed, 23 Sep 2009 21:01:26 GMT

It'm guessing there must be some smart way to do this that I haven't figured out.

I'd like to record the wet and dry output of my PODxt to my DAW. This let's me dial in what I think is the right tone for the song, and play using that as feedback and feel for the song.

But later if I realize a different tone is called for, I can use the dry track to apply that.

Is there a smart way to do that? Some combo of the USB output, and the analog output, or settings in Gearbox or my DAW?

Pod xt live - what comes bundled???

support@line6.com — Sun, 01 Nov 2009 10:59:11 GMT

Just bought the wonderful Pod xt live from Dolphin in Liverpool. It's not 100% clear to me exactly which software I'm entitled to download free of charge. I read somewhere "Comes with Gearbox" - is this true? Do I just download it from the downloads section of this website? What other software do I need/ can I have free from the downloads section?

Thanks for your help on this!!!!

Don

pod 2.0 upgrade?

support@line6.com — Thu, 15 Oct 2009 14:30:53 GMT

hello line6, is there any plans for the 2.0 to have mic preamps like the x3 someday? same old features and style, just additional mic pre's...

Edit / Monkey not able to "see" the XT Live

support@line6.com — Sun, 20 Sep 2009 14:32:50 GMT

I haven't used my Pod XT Live for a while. And when I try to connect to it with Edit, there's no response. I've downloaded the latest Monkey software, and with it the latest drivers. Still Monkey and Edit is unable to connect to the device, both with USB cable and a Roland UM-1X USB to midi device.

That's very strange, as I perfectly well connect to my Vetta II Combo using the Roland device. Do you know why this might be happening?

Well, I guess I'll spend the night turning knobs manually, as I have a lot of preset to go through, and curse the manufacturer... ;-)

While I have you Line 6 guys "on the line", I might as well share another frustration. For my new rig, the one I'm putting together because the Vetta is just to big to haul around, especially when I really only need to connect directly to the PA. That's why I've turned once again to my Pod XT Live. I find that is does not offer the flexibility of effects as the Vetta does.

So I've been curious at the X3 Pro, as I will put some analog pedals and a switcher in a rack (and also as the X3 surprisingly enough does not have midi connectors...!). Trouble is, the X3 Pro is not a "Vetta without power amp and/or speakers", as I would expect it to be. If I got it right, it only does one stomp box effect at a time. That's a bit of a let down when I want a autowah and a Screamer at once... So for my the choice will probably not be Line 6 when I upgrade the gear. You've given me both playing pleasure and headaches (like today) during my years as a user.

Best regards,

Alexander

Oslo, Norway

BASSPOD LIVE XT AND RIFFWORKS

support@line6.com — Wed, 28 Oct 2009 04:41:01 GMT

ARE THERE ANY BASSIST OUT THERE THAT HAVE BEEN DARING ENOUGH TO TRY RIFFWORKS WITH Basspod live xt? or any recording enthusiasts? Considering purchaseing for quick recording. Please advise.

What Happens when A Boss GT-10 meets a Line 6 PODxt! (HELP!!!)

support@line6.com — Sat, 23 May 2009 08:46:43 GMT

Hi, folks! John J. back here as a Line 6 user after a year long hiatus.

What I've been trying to acheive is to run a PODxt in the effects loop of a Boss GT-10 and synchronize the two devices for patch and effects switching via MIDI.

In this case, the Boss GT-10 is the main floorboard controller and effects processor, while the PODxt is used for amp, cabinet, and microphone modelling.

Below is a post that I posted on the GT Central forum stating the issues I faced in this pursuit.

It would be great if you guys could give me your comments and feedback as well as help me solve the issues I've faced.

The post:

Hi, guys!
I've finally got my rig (minus the FV-500H soon coming!) together.

First off, the things which annoy me:

1. Patch synchronization

If you check out the PODxt manual, it states that that it receives MIDI Program Change messages from 0~127 to switch patches from 1A to 32D.
Checking out the GT-10 manual, it states that it sends MIDI Program Change messages from 1~128.

Already I'm expecting a drawback in not being able to access patch 1A in the PODxt. But, I hook everything up anyway, and I set up the Send/Receive Channels up properly as well as the Program Map menu (shifting all the defaults by one value so that in each bank of the PODxt - GT-10 combo: 1=A, 2=B, 3=C, 4=D, I had the Program Change set to Prog instead of Fixed for this) and lo and behold! The PODxt switched presets on a one-for-one basis with the GT-10 and even patch 1A lined up with patch 1-1.

Seeing this as unexpected but pleasant behaviour, I moved on, trying out the patch synchronization through various banks and all was going good, UNTIL I hit Preset U26-1 which somehow sent the PODxt back to 1A and cycling up from there instead of 26A! I tried everything I could think of, changed every possible parameter, and still this behaviour continued!

So, I checked out the GT-10 manual. Turns out that the way the GT-10 changes banks involves some three byte message which includes the Program Change message, CC#0 and CC#32. CC#32 remains 0 throughout all patches, but CC#0 dictates which "level" of banks to switch to in steps of 25 banks (hence the 4 banks of MIDI Program Map)!

Turns out, the PODxt can't read CC#0 (Or can it?), so once it finishes Bank 25, it just goes back to Bank 1!

So this leaves me with 50 banks of Boss GT-10 Factory Presets, 25 banks of synchronized GT-10 and PODxt presets, and 25 banks of GT-10 User Presets (I simply turn the S/R off in these User Presets as the PODxt continues to cycle from 1A.)

Can someone think up a workaround for this? Thanks!

2. Effects switching via MIDI

So, I look up the CC# for switching on and off the Stomp block in the PODxt via MIDI and turns out it's CC#25. I assign this to Control Pedal 1 and expect it to switch on and off the Stomp block on the PODxt, but it's in momentary mode by default! The Stomp block stays on for as long as I hold Control 1 down, and goes off when I let go.

Can someone please help me change it to toggle mode?
I hope it's possible.

3. BPM synchronization

As hard as I've tried, I can't get the Tap button of the PODxt to blink simultaneously with the Control 2 pedal LED to which my Master BPM is assigned.

Can someone please help me out with this?
Thanks!

THE GOOD NEWS IS:

A good lot of the PODxt presets are "dry" amp tones with no effects.
So, I've experimented with adding on the GT-10 effects (Comp, OD/DS, Chorus, Delay, Reverb, etc) and the tones I'm getting are mind-blowing!
Extremely satisfied with the results thus far.
The amp models are so clear and responsive.
The dirty ones clean up really well when I roll the volume knob on my guitar.

Note: My guitar is set up with the GT-10 as per Ricig's Calibration theory.

Cheers to all, and a big cry for help regarding the three issues stated above!
Any assistance at all is greatly appreciated.

pod xt live's tuner/tap tempo button

support@line6.com — Fri, 20 Nov 2009 20:52:34 GMT

my button no longer works is there a fix for this? it slowly stopped working i would have to press harder and harder, as time passed, to get the tuner to engage and now it doesnt work. any help?

bryant283@att.net

support@line6.com — Sat, 07 Nov 2009 11:43:45 GMT

i have installed everything and on gearbox im showing that my usb is not connected. what to do to fix this problem

dry & wet signal to DAW pod xt

support@line6.com — Thu, 06 Aug 2009 12:01:59 GMT

Hi,

Can I use my POD XT to output a wet and dry signal simultaneously? Or if this is not possible, is there a way to send a dry signal to my DAW and monitor a wet signal at the same time? I have studied the manual and your suppot pages, but have not found this info, so my appologies if this has been asked before...

Thank you,

Andreas

Pod 2.0 input\output problems

support@line6.com — Fri, 03 Jul 2009 20:44:37 GMT

I got some problems with my POD, i dont think its even 2.0 because, as i red on the older version above pedal input there is "pedal" mark. Generally i can't hear a sound, i tried L\R outputs, and headphones. Even tuner does'nt work so its propably an input problem. I took of back cover of POD, cleaned everything, checked if sockets are ok, and i think everything is in good condiction.I dont know what to do, its second hand stuff and warranty expired long time ago.

I've never tried to connect this POD to computer.

http://line6.com/news/offers/864 ??

support@line6.com — Thu, 03 Sep 2009 23:57:04 GMT

I received an email from my retailer that I could download a free Line 6 Farm Pod plug. I clicked on the link where it said to download, and nothing seemed to appear on my desktop, in my email, or on my ilok. When I try to do the process again, to see if I did something wrong, your website says that I can no longer download.

????

Thanks,

David Baldwin

davidbaldwin@ca.rr.com

UX2

support@line6.com — Sat, 07 Nov 2009 13:19:19 GMT

Hi,

I am currently using my macbook to record tracks on Logic Express (Version 8) and garageband.

I have no difficulty in recording guitars and midi instruments. However, I have recently purchased a soundtronics STC-2 condenser mic and can't get it to work. I know the mic s working - but can't get anything out of it using the ux2 with logic express or garageband. I assume this will have something to do with settings, altough I expcted to see some response on the level monitors on the ux 2. I would welcome any suggestions.

Many thanks

Howard

Pod 2.0 and Line6 Edit

support@line6.com — Wed, 05 Aug 2009 14:19:57 GMT

I have two pieces of ine6 equipment, a Flextone II and a Pod 2.0 (the older one so I didn't have to buy a new floorboard). I thought it would be nice to have a backup of my sounds and an easier way to edit them, so I installed the Editor.

After starting the Pod and Edit, the Pod was recognised, the list of sounds was filled, etc. I select a patch click Load, but the sound isn't loaded on the Pod... Okay, Edit then... I change parameters, and they are reset back to the value they were (and probably are as there was no change in the sound). I change a patch on the Pod and I see the correct patch being selected in Edit. Doubleclick the patch and the Editor Window opens. Changes within Edit are rejected as before, changes on the Pod itself though are broadcasted almost immediately.

I do the same things on the Flextone... No problem at all. Is the Pod interface within Edit faulty? Is my Pod's MIDI In dead in the water?

Thanks.

P.S.: as far as I am aware I am on the latest firmware (v.2.30 according to the Edit Main Window). I am running Mac OS X 10.5.7 as OS.

P.P.S: I believe I read something like the forum software doesn't play nice with Opera and I should fake being Firefox to be able to do what I want here. That does not work for me. Neither does Safari work. This is done via Firefox.

Problems with Pod 2.0

support@line6.com — Sat, 02 May 2009 02:26:01 GMT

I'm having troubles with my POD 2.0. For the past month or so it's been humming loudly. I've checked all the cables, my other pedals, and played with different amps and guitars in different places but it stays just as loud. It doesn't make a difference if the noise gate is on or if I'm on a clean or distorted channel. Could it be a hardware issue, in which case how/where would I get it fixed? How can I find out if it's the power supply and how could I replace that?

I'm going to try reseting it, but I'd like to back up my tones first. Is this the best cable to use: M-Audio USB Midisport Uno MIDI Interface?

Thanks,

Tyler

FBV bought new, broken activator switch...

support@line6.com — Fri, 06 Nov 2009 19:10:23 GMT

I just bought a FBV yesterday Nov 5 (at a significantly reduced price because it didn't come with a box, manual or cable). The FX Loop activator switch doesn't work. Can I just order one and replace it myself, or is that the sort of thing that is covered when I buy a new product. When I first hooked it up, the thing was hardly working at all. I opened it up and found that all the ribbon cables were either partially or fully disconnected. I plugged the ribbon cables in and put it back together. When I hooked it up to my pod xt pro the beast came to life and it seems as though everything workes except for the FX Loop activator switch. Some guidance would be appreciated. It seems like a pretty easy fix.

Thanks.

I am having a problem with Line 6 Monkey, installing updates to use my Pod XT with Propellerheads Record

support@line6.com — Tue, 20 Oct 2009 16:33:04 GMT

I am having a problem with Line 6 Monkey, installing updates to use my Pod XT with Propellerheads Record

Please make sure to disconnect all other USB devices from the computer
(except for a mouse and keyboard) while troubleshooting this issue.
Completely remove ANY USB hubs, even if not in use and test the PODxt
on all of the USB ports on your computer.

I have done this

What are the detailed specs of your computer? Do you have any other USB devices connected? If so, what are they?

Windows Vista Home Premium, SP 1, Hewlett Packard, HP G60 Notebook, Intel Pentium Dual CPU T3200 @ 2.00 GHz, 3.00GB RAM, 32 bit OS

No other USB devices connected

Do you have any pop up blockers or antivirus software running?

No. Using Firefox and turned off the block pop ups option. I also tried using Internet Explorer with pop up blocker turned off.

Can you post a screenshot of the error message you are getting?

Have you tried switching USB ports

I have tried all 3 USB ports.

have you rebooted your computer lately

Yes, first time it happened.

Have you tried reinstalling your drivers?

Yes

You absolutely have nothing else plugged into this machine?

Nothing else

What ISP do you have?

79.97.81.49 - UPC Ireland

What Monkey version are you using? Have you tried reinstalling it?

V1.31 Yes I have reinstalled it.

Let's try a thorough uninstall. Unplug your Line 6 device, go to
HD>Applications>Line 6>Drivers and remove your device drivers.
After that, drag the entire Line6 folder to the trash.

I have done this. Uninstalled all line 6 drivers and trash binned the folder.

Once you have done that, download the latest version of Gearbox, plug in your device, and then install it.

I have done this

One
thing that has worked for me in the past was to leave the device
plugged in even after the installer program has told me to unplug it so
you may want to try that.

What do you mean by this? just press the cancel button when prompted? Please elaborate.

I also get a caution (yellow triangle with exclamation mark) sign next to USB firmware on the updates page. It says the installed version is 1.06 and the newest is 1.12. When I update I am told Pod XT update successful but when i return to the programme it is the same as before (Yellow triangle, version 1.06)

Any help appreciated.

Pod XT Live output volume imbalance

support@line6.com — Sat, 20 Jun 2009 20:19:58 GMT

Hello,

I'm having a bit of a problem. I've checked my cables and I've isolated the problem, so I know it's coming from my Pod. Anyway, for some reason, the right channel from the stereo (phones) output comes out way quieter than the left channel. This issue does not depend on what patch I'm using at the time. I've checked the settings on my computer and there is no speaker panning in the Volume Controls. Any ideas?

Thanks,

--Nik

Can I convert my old "POD PRO" patches to my new "POD XT PRO"

support@line6.com — Sat, 20 Jun 2009 19:29:48 GMT

Hi,

Can I convert my old "POD PRO" patches to my new "POD XT PRO" ?

If yes, how can I achieve the transfer or conversion ?

Thanks in advance for all your help & cooperation,

Chuck

podxt

support@line6.com — Sat, 10 Oct 2009 03:19:57 GMT

hey i bought a secondhand podxt, i cant get it to update, says reconnect usb, i know the cable is not bad, or it wouldnt recognize when i plug it in, then it keeps telling me to activate features, now if tried getting ahold of you guys, this thing is dead mint, still has the plastic on it and everything, than when i try to activate features, it wont do it and shows an error, please help me out , because im not calling again and sitting on hold for over 20 minutes again. i got this thing registered, what gives please fix asap, thanks.

Diagnose grounding hum/buzz on Floor Pod Plus?

support@line6.com — Tue, 18 Aug 2009 04:06:03 GMT

I am trying to correctly diagnose a grounding hum/buzz problem on my Floor Pod Plus. Whenever I use my FP+ at home going into my amplifier, or simply into my headphones, I never have a problem. (One caveat: I do get some slight hum/buzzing when I use some high gain settings, but these are rather easily eliminated by using a proper gate setting on the Floor Pod Plus).

However, whenever I take my FP+ to my church and plug the unit into the sound system via a Radial JDI MK3 Passive direct box, I get the big dreaded grounding hum and buzz. I am confident that it is a grounding issue since if I touch the guitar pickup, or anything metal on the guitar or on the FP+ itself, the hum/buzz (mostly) goes away. I guess I could play with a grounding strap on my wrist, but that doesn't seem very workable. Besides, the hum/buzz is still noticeable if I crank up the signal volume.

If I plug my guitar straight into the direct box, I do NOT get the hum/buzz, so I'm pretty confident that the cabling is just fine. The hum/buzz has been getting worse and worse over the past few weeks, such that using tricks to try to gate the signal on the mixing board eventually killls the gain/signal-strength coming from the FP+.

In the past, we have unplugged and re-plugged the patch cord on the sound system's patch panel in a closet, and that sometimes fixes the problem. But now that isn't even working. If I put my headphones into the FP+, I can pick up the hum/buzz there, too. But if I disconnect the main output going into the sound system's direct box, the hum/buzz goes away.

What is REALLY aggravating is that my other guitar player uses a Pod XT and he isn't getting ANY type of hum or buzz. It is just me!

What could be the problem? Could there be something coming loose in my Floor Pod Plus that needs to be fixed? If so, what is the recommended solution?

I have been reading that it could be a ground loop problem. But it would be near to impossible to isolate with our sound system. So perhaps, could something like an ART Clean Box II or an Ebtech HE-2 be used to eliminate the problem? I want to make sure I have exhausted all other possibilities before I make the investment in another device -- these boxes are not exactly cheap. And besides, why would this necessarily fix the issue when my fellow axe handler is running troublefree using his Pod XT?

Thank you.

Clarke

I need the footswitch POD 2.0

support@line6.com — Wed, 06 May 2009 18:25:15 GMT

I own a POD 2.0. I need the footswitch but i can´t find it anywhere. I live in Monterrey, Mexico. ¿any ideas? thanx

100ms Delay when Recording POD XT Live into Macintosh / MAC OSX

support@line6.com — Thu, 18 Jun 2009 21:01:27 GMT

When recording from the XT Live into the Mac I'm experiencing about a 100ms delay. The effect is everything sounds like it's in the right time when I play along with a click, but upon playback the delay is undeniable. Each sound file must be grabbed and shifted up 100ms to get the audio track in time, which is quite annoying. I couldn't correct this great of an error with a simple record/playback delay of -4410 samples in my studio settings for DP, although in theory this should have done the trick. The fact that the problem persists on multiple applications makes me think it's driver (or driver settings)-related.

Machines used:

iMac (brand-new 2.65 GHz Intel-based) with 4GB RAM, everything updated to latest spec.

Mac Mini (old 1.43GHz G5 processor) with 1GB RAM (how very sad, but that's all it can handle)

Software used:

Line 6 Monkey 1.27 used to update all drivers to the latest

Digital Performer 5.1 (where I discovered the problem, tried on both Mini and iMac)

Garage Band (used to verify the problem wasn't internal to Performer - the symptoms persisted, only tested on the iMac).

When I play into my Windows laptopo/Rifftracker software, everything works perfectly. This seems to be MAC specific.

Bass PODxt - Midi timeout

support@line6.com — Wed, 15 Jul 2009 05:33:18 GMT

I'm having a problem running L6 edit on my computer. This seems to be a common problem, on the forums there are several unresolved posts related to this same thing.

I also own a guitar PODxt that works fine with edit. My best guess is that its a java conflict. Any suggestions? How about a new flash on L6 monkey for all the thousands of bass players out there.

Thank you for your time, I love Line 6 products.

Sound Diver doesn't find POD

support@line6.com — Wed, 06 May 2009 16:42:52 GMT

Have POD and did the eprom upgrade some time ago. Today I went to connect with Sound Diver but SD can't find POD. Downloaded and installed SD 3 but still doesn't work. SD 3 said: POD was on port II but that port ll no longer exists! Now I'm in hell. Any ideas anyone?

how to check ground?

support@line6.com — Wed, 23 Sep 2009 14:04:29 GMT

how do i chack to make sure my mod xt live is grounding properly? it's making a lot of noise when plugged into my amp, and touching the metal parts on in makes a slight sound. makes a lot of noise even when it's not plugged in to power or a guitar. just the xt live and my amp. then it's the same if the unit is plugged in, not plugged in, turned on, turned off, plugged into a power conditioner, plugged into a normal outlet, guitar plugged in, not plugged in.. ect. you can still hear the guitar and effects and stuff over the noise, but it's pretty loud. it's the same no matter the volume of the pod or my guitar. just constant.

and it's wierd that if i plug the amp into the right (as opposed to the left) output on the pod, it makes a terrible noise.

i have tried many cables, including new ones from planet waves and it all sounds the same. a hum canceller between the pod and amp reduces the noise somewhat, but does not eliminate it.

so how would i check to see if it's grounding right?

Low volume with floor pod in fx loop

support@line6.com — Tue, 19 May 2009 21:37:53 GMT

Hi, i recently bought a floor pod to use in my flextone 3's effects loop for just the effects and wah. I connected my guitar into my amp input, fx out into the floor pod input. Then mono of floor pod output into fx loop return. I switched off the amp modelling, but the volume coming out of the amp was ridiculously quiet. Not sure why this sis, since i had the volume oat the back of the floor pod on full. Anyone else experienced such a problem?

Any help is much appreciated.

Thanks

Model packs in standalone mode for POD xtPro

support@line6.com — Thu, 12 Nov 2009 22:01:32 GMT

Hi there,

I have a question about POD xt Pro and model packs. At this time I'm using a UX1 with metal shop and PodFarm. I'm looking forward to buy a rack gear for using it as amp on stage or on studio without the need of my laptop.

The point is : if I buy a POD Xt Pro and I register the metal shop for using with it in my Line6 account, will I be able to shape a sound with Podfarm on my laptop (like a Deity), load it into my POD xtPro and use it on stage without the need of the computer ? I mean, does the POD xtPro work as a standalone unit as soon as the concerned liscences are registered on my Line6 account ?

Second thing : I red nowhere POD xtPro can manage dualtone feature. If I create a dualtone preset using PodFarm on my laptop, will I be able to load it in my xt Pro for a standalone use ?

(for "standalone use" I mean using the POD xtPro as a preamp in front of a poweramp on stage or into the mixing desk on studio)

Thanks guys, I like the POD X3 but I've already my metalshop and I don't want it to be useless...

syel1984@live.fr

KB37 MIDI recordings showing up too early.

support@line6.com — Fri, 17 Jul 2009 16:20:28 GMT

Hello. I just received my Line 6 Studio KB37 yesterday and I really like the product. But I am having some difficulty getting the MIDI recordings to line up properly in time. They always show up too EARLY after being recorded, usually about 50 to 80 msec too early (2205 to 3528 samples at 44.1kHz). The audio recordings seem to line up correctly – I recorded the metronome click by looping it back through the KB37. But every time I try to record MIDI from the keyboard, the notes are never lined up and the offsets are not consistent.

Attached to this email is a Power Point file that includes lots of screenshots detailing the situation and my complete computer setup and configuration (Vista x64, Intel Core 2 Duo – 2.66Ghz, 4 GB Ram, SATA 7400 RPM drive). I believe the computer is beefy enough.

Also worthy of note is that I have tried to use this in both Sonar 8 Studio and Steinberg CuBase with identical results. Occasionally, the audio in my headphones will get garbled and static-like when playing the keyboard. Also, I have tried most of your suggestions in the “Windows Vista Optimizations” and the computer is running pretty bare bones now. Line 6 Monkey is up to date and has updated everything.

I am sincerely hoping that you are able to provide me with some ideas to try, because I really like this product and desire to continue using it rather than sending it back. As an original POD owner, I have great confidence in your products and I am sure it is something in my Windows setup that I am missing.

Thank you in advance for your assistance. I can’t wait to get this working properly!

Sincerely,

Brett Darling

I use Snow Lep OS and wonder if Garageband can be used through the Pocket POD even if Line 6 doesn't work with the software as of now? I've read that I need a interface cable to use Garageband from inst. to comp. I just want know about my POD. Thanx

support@line6.com — Tue, 20 Oct 2009 18:41:16 GMT

I use Snow Lep OS and wonder if Garageband can be used through the Pocket POD even if Line 6 doesn't work with the software as of now? I've read that I need a interface cable to use Garageband from inst. to comp. I just want know about my POD. Thanx

Severe driver issues - Mac 10.5.6 & Pod XT 4.1.0

support@line6.com — Fri, 01 May 2009 01:14:00 GMT

I installed the driver update and afterward all the system audio playback was shredded. Stuttering, distorted, etc.

I tried rebooting, and restarting the Pod. No change.

I ran the driver uninstaller and rebooted. Then installed 4.0.1 drivers.

I got the /System/Library/Extensions/Line6Audio.kext was improperly installed error.

Ran the uninstaller again. Repaired disk permissions. Installed 4.1.0 drivers and rebooted.

I got the /System/Library/Extensions/Line6Audio.kext was improperly installed error yet again.

I've tried several combinations of uninstall, permissions repair, reboot, etc and now I can't get the driver to load at all. Every single time I reboot and plug the pod in, I get the improperly installed error.

Pod Farm

support@line6.com — Mon, 12 Oct 2009 04:41:31 GMT

Hi I had already downloaded the pod farm version for ableton Live and have the license on my ILok, I recently erased my hard drive and was looking to download it again but do not see where I should download. Any info is appreciated. Thank you for your time.

-Warren

Hardware registration.

support@line6.com — Mon, 02 Nov 2009 14:44:17 GMT

Hi, my name is Ricardo and I bought a POD xt pro from a fellow on a online forum. I'm having some trouble into contact him so he can 'unregister' the pod so I can register it to my profile.

Is there anything that you guys can do?

Thanks

Help, new user!

support@line6.com — Sat, 04 Apr 2009 05:05:31 GMT

Two questions actually, I just had my cheap effects processer malfunction during a gig and ended up with a drumstick in the back for it. Gotta love drummers! ;-) Anywho, these are my questions,

Question one,

Can the Pod X3 do everything the Bass Pod XT Live can do? If so, will the X3 sound as good for bass frequencies as the Bass Pod XT Live? I couldn't decide at the store and went with the Bass Pod because I have a Line 6 guitar amp all ready for my guitar and all the stuff in Logic for vocals. I play gigs with the bass and wanted a dependable effects processor to have at my feet in order to avoid future drum stick welts. I do a lot of home recording and am wondering if I made the right choice?

Question two,

How do I use a delay and a reverb at the same time, is it possible??? I'd hope so, thing cost enough! What about two mods at the same time? I'm reading the manual just am having a hard time finding these answers.

Thanks!

http:www.myspace.com/freshiesfolly

USB Firmware Update via MIDI?

support@line6.com — Sat, 10 Oct 2009 16:47:29 GMT

Apart from the USB connection my device is working properly.

I can also see it (and update flash memory via Monkey) using MIDI cables (with MidiSport 2x2).

It was starting not working long time ago during an update session...

So I'm convinced that is just needed to "reprogram" the device to let it back to work!...

So the question: there is a possibility to do it in my conditions?

Is there a way to download custom tones to a Floor Pod Plus?

support@line6.com — Wed, 14 Oct 2009 21:40:24 GMT

Is there a way to download custom tones to a Floor Pod Plus?

Question about Pocket POD / Guitar Port

support@line6.com — Tue, 23 Jun 2009 13:34:20 GMT

I am considering getting a pocket POD. I have the standard Guitar Port 2.0 and I was wondering if the pocketPOD is equipped with the exact same arsenal. Basically I have some saved patches on Guitar Port and If I get a pocketPOD, will the tones transfer over and sound exact If i were to compare them both A/B through headphones? Please be honest.

Pod XT Live Flash Memory will NOT update

support@line6.com — Wed, 22 Jul 2009 01:34:24 GMT

I have a POD XT Live ECN: 01271002. I've recently upgraded my PC from XP to Vista. I have always used thsi machine to interface with my Pod XT Live prior. I redownloaded monkey which then found my device, and showed that i needed to update the driver and the flash. I updated the driver and it seemed to update fine. My current version of flash is 2.14, and monkey says the new version is 3.01. I first tried letting the monkey "update selection" button work. I would see the "downloading flash memory..." message. Then a got a warning message that updating flash may require me tweak the old tones. Continue? I clicked Yes. Then a license agreement popped up of which I accepted the terms. Then immediatly I got an error message that reads "Failed to open downloaded file. Reason: (code 80001019) Unrecognized file type.

So I thought I would try something else, so I went to the Line 6 website and downloaded the "Podxtlive_3_01.xtf" file and saved it to my hard drive. I then tried using the monkey's "update from file" option. I got the same set of screens and the same error message.

Please help!

Thanks,

Rob

Pod Xt

support@line6.com — Sun, 01 Nov 2009 15:31:11 GMT

I purchased a POD xt on ebay and I am trying to register the unit but it is still registered to the former owner...I am not sure if I can still reach this person. What do I do?

Thanks for your help,

Eddie

Pod XT Live vs Pod X3 Live

support@line6.com — Thu, 12 Mar 2009 17:46:41 GMT

Boy this new community is confusing....

I am using a POD XT bean for home use and playing live, but am really considering the advantages of the Pod XT Live or the Pod X3 Live
I am looking for some feedback on the pros and cons of each for recording and playing live....

I use a PRS SE Custom Semi-Hollow and Fender Tele '72 Thinline Reissue....

POD Studio KB37 Model Pack

support@line6.com — Fri, 30 Oct 2009 14:58:24 GMT

Hello!!

I have a POD XT LIVE with FX Junkie Model Pack + Metal Model Pack and i am thinking to buy a POD Studio KB37.

My Question is....it is possible to get the Metal Model Pack in POD Studio KB37 since i already bui it to POD XT Live??

Than You.

Best Regards.

Nuno Pinto.

Pod XT - Trying to up date the new drivers in vista and will not find drivers.. Help? mark this as a question--

support@line6.com — Sun, 01 Nov 2009 14:07:19 GMT

Vista will not install the drivers.

im using the Line Six monkey and it give me notice that my drivers are out of date and i proceed to update

i get all the way to the final warning about disconnecting the USB from the line 6 Podxt device

i click finish and instead of Vista taking over and finding the drivers and completing the operation

nothing.. for some reason Vista is not seeing that i have installed new drivers.. this was working yesterday

on Oct 30th.. with no problems.. but now the pod is not being seen.. and i can not even point to the drivers on Vista

it will not see them so im dead in the water,,

edit:

6) After the drivers are downloaded, Line 6 Monkey will exit so the Driver Install Wizard can launch.

7) Follow the steps of the setup wizard closely and precisely. Do not connect the USB cable to your device until the setup wizard prompts you to do so.

8) Once the Line 6 Monkey prompts you to plug your device in, the Windows Found New Hardware Wizard should open. Please follow the steps of the hardware wizard. this is were things foul up (i hit the finish key and there is no farther instruction) any ideas?

9) Once the hardware wizard has finished loading the drivers, your drivers should now be successfully installed.

I can see the drivers in the Dir. they exist it always comes up with the error

"Windows could not find the driver software for your device" but i can see the files in the Programs files/line 6/drivers Archive/Podxt dir..

i will keep at it..

but if you have any suggestions that may be of help,,

please help..

I have already been through the FAQ and have tried following those instructions to the letter..

thanks for your time

chris

Message was edited by: scuzzo

POD xt Live Powersupply question

support@line6.com — Sat, 23 May 2009 16:04:07 GMT

Hi,

I have a POD xt Live, but the power supply is missing. I do have an adapter that can do the 2000mA and 9V, but I need to know if the connector of the power supply is plus on the outside, or on the inside. Any help with that would be great.

xiaolung

Black stripes in LCD on PodXT Live

support@line6.com — Thu, 14 May 2009 04:22:32 GMT

So my 2 year old PodXT Live recently started showing black stripes vertically on the screen. At the beginning it was just like 3, and it progressed until now there are 4-5 big blocks of black across the screen, making it totally unusable. The LCD on the left (with the numbers) is also failing in that the bottom right and top right "pixels" aren't fully lit, just darker. Any ideas on how to fix this?

I read about someone with similar problems but briefly described the solution as "cleaning the cables", but I'm not sure as to what cables they're referring to. I can't send it in to support because I live in Costa Rica and the only place which fixes these pedals charges way too much to fix it. I can get myself around fixing stuff and have already opened the Pod before, so I just need to know what cables are the ones that need to be cleaned or what else can I do in order to fix it. Thanks!

Pocket pod problems

support@line6.com — Wed, 06 May 2009 08:56:20 GMT

Hello. My pocket pod will not show upp on my computer when i have them connected. What shood I do,.

POD 2.0 Does not Work with line 6 floor board

support@line6.com — Mon, 26 Oct 2009 19:56:02 GMT

I bought the line 6 pod 2.0 used, and it works fine, then i bought the fcb10 from bheringher to use with the pod and it was working good.

But last week i bought the line 6 floor board (used) and when i connect it to my pod it doesn´t work, i have tried the floor board in other pod and it worked fine, i tried the cable to and it was working.

When i connect the floor board to the pod the lights of the buttons - manual, midi, save, tuner, noise gate, tap- all turn on, and the floor board stays off.

So the problem its on my pod and i dont know how to solve it.

I need HELP!!!!

PLEASE!!!!

FloorPod manual settings

support@line6.com — Sat, 27 Jun 2009 23:09:07 GMT

Help Since the Floor Pod cant be programed by computer.Where can I find Manual settings for some artists

that I like Stevie Ray,Carlos Santana...You Know Old School

Cannot load drivers for POD XT LIVE Using Windows 7

support@line6.com — Sat, 04 Jul 2009 21:45:26 GMT

I have tried using earlier versions of Monkey. I am using a 64 bit computer. I got monkey to recognize my toneport kb37 but not my xt live.

Flash Memory

support@line6.com — Sun, 11 Oct 2009 12:13:32 GMT

Pocket POD update failed
( Code 80009000) Unknown MIDI error

and I don't have Pocket POD

My Pocket POD don't work. Why ?

Pocket Pod stuck with "FlashUpdate 1.00" on display

support@line6.com — Sun, 26 Jul 2009 06:18:39 GMT

I made an attempt to update the firmware of a recently bought Pocket Pod. Although following the instructions in the manual the update failed and now it is not possible to get the thing up and running again. The only thing shown on the display is "FlashUpdate 1.00". How can I fix this?

I run Windows XP and use Vyzex Pocket Pod 1.10. The Pocket Pod used to work before my update attempt...

Line 6 Pod Farm 1.11.0, UX1 and Mac OS X Snow Leopard

support@line6.com — Mon, 31 Aug 2009 22:52:15 GMT

I have installed the new Mac OS X Snow Leopard and the latest Line 6 Pod Farm 1.11.0. Disaster! When I connect the UX1 to the USB port the system fails and I have to restart it after disconnecting the UX1. Is Pod Farm not compatible with the OS X Snow Leopard? What can I do? Thank you for the information.

Windows 7 RTM and PODxt

support@line6.com — Tue, 11 Aug 2009 21:36:34 GMT

Hiya all,

I've never used this forums. Not because I'm a super noob or something, but just because I didn't need to ask for something as the FAQ and other forum's posts have helped to sort things out.

Things is that I have the Windows 7, RTM Build, but when connecting my PODxt via USB, I have lag into my sound. I've never tried with WindowsXP, so I don't know if that lag is normal or something, but as far as I know from other people, PODxt via USB doesn't lag, but does in Win7. It is caused maybe because of the Drivers? Am I doing something wrong?

Thanks for the reply, really appreciated.

Raül

Can you tune down a tuner????

support@line6.com — Tue, 21 Apr 2009 04:39:31 GMT

I have the Bass Podxt Pro, my band plays tuned a half step down, which is no problem until I am trying to tune the low "B" on the 5 string. The tuner will tune a "B" but not the B-flat. Is there a way to adjust this?

Sound dropping out - Sound increasing volume for no reason.

support@line6.com — Tue, 25 Aug 2009 06:10:00 GMT

Hello ~

I own a factory refurbished Bass Pod Pro XT and tonight during rehersal the sound gave out (dramatically changed level and tone) during a song for no reason. I thought my amp went out or something, but it turned out that switching to another preset and then back again I got sound back again.

I don't have a floorboard, and I was no where near the controls.

Then later in the night for no aparant reason, the sound volume pretty much doubled, and tone changed during a song, for no reason, and again, the only way to fix it was to switch to another preset and then back again. I was at least 3 feet from the unit, nowhere near the controls.

This is very scary since I have a gig in 3 days and I am liking the sound I am getting. However, my question: Is this a common issue and if so it looks like I need to start shopping for something else and quick. Perhaps that's what I get for purchasing a refurbished unit?

Please help!

By the way, I tried registering, but said was already registered to someone else.

Here is my serial (21)BPX1P5413000424

Thanks

Kirk

What exactly do I need to have in order to use my Bass POD xt live amp&cap models with Propellerhead Record?

support@line6.com — Wed, 23 Sep 2009 00:39:07 GMT

Is this a joke?! What is wrong with the info on this site? I can't find a single link to something mentioned in the Record Manual in order to use the Amp&Cab Models on my BassPOD xt live:

"Propellerhead Record Key" Supposedly contained in the page :http://www.line6/phrecord

SORRY TO SOUND DEMANDING, BUT THIS IS $$$$$ I'M PAYING TO USE THE PRODUCTS, AND I WAS ASSURED THAT THE POD AND MY SOFTWARE WOULD WORK IN CONJUNCTION. This site has been completely unhelpful thus far, and frustration is growing on my end! I am a VERY vocal guy when it comes to misleading or untrue information and false claims, as well as poor customer service and response time!

Thanks anyway!

Maybe I'll get an answer, I figure probably not!

Readyness for Windows 7/64 bits

support@line6.com — Sat, 12 Sep 2009 09:39:40 GMT

Hello,

I am a proud owner of a POD XT Live. Can you tell me if the driver and software are ready for Windows 7 in 64 bit mode ?

Thanks

Lucien

product registration

support@line6.com — Sat, 07 Nov 2009 11:42:43 GMT

hi ive jusr bought a podxt on ebay and want to register it but the system says its already registered can you help please

Pocket Pod with GarageBand and/or Sonoma Riffworks

support@line6.com — Tue, 31 Mar 2009 13:14:47 GMT

I want to buy a Pocket Pod, but first I want to ask something: is it compatible with GarageBand and Riffworks?

Thanks

using fbv to control other midi devices

support@line6.com — Mon, 16 Nov 2009 18:57:29 GMT

Alright, right now I'm running a pod 2.0 with a fbv controller.....I know that the fbv controller is designed for the vetta heads and that there are certain foot switchs that do not work with the pod (like amp 1 & 2 and favorite...) I'm wondering b/c I'm having trouble getting in touch with line6 if I can control external midi devices such as a tc electronics g major through the midi connections with the extra footswitches and when I upgrade to a pod x3 pro if i will be able to do the same I would like to control around 3-4 different things with the fbv if thats possible

Thanks

Bass pod

support@line6.com — Fri, 16 Oct 2009 01:50:03 GMT

Good evening !

I just bought a bass pod with a foot switch.

i'm still exploring all the possibilities of sounds available to me.

I have 3 questions !

-1 Can i download sounds from the net to put into my pod? If so, how do i do it ? But i don't think i can, for there is no usb port connection on my pod.

-2 How do i stop the effects / and go back to my normal bass sound ? ( if i just wan't to punch a part of a song with the effect, and then stop it to go back to normal sound)

-3 THe effects TRON UP and TRON DOWN and BASS SYNTH don`t seem to work at all on my bass pod ???

Do i need the floor board to operate those ?

Output..Pocket POD seems hotter than Floor POD Plus

support@line6.com — Tue, 20 Oct 2009 22:08:32 GMT

ey Folks,

I've been playing with the Pocket Pod I have had for a few years and running it to the power amp of my old Fender and my Peavey C30. I have also been doing the same with the Floor POD Plus I bought last year. Now normally I use the Pocket POD for head phones and the Floor POD straight into the input of the amp. So I thought I would try to eliminate the coloring of the amp by running straight into the power amp. I changed the output type on the Pocket Pod to the B setting for straight into the power amp section of with an open back cab and adjust the output to a reasonable level. Sounds great. No Complaints. Then I try to do the same with the Floor POD Plus. Now all I have to work with there is the Direct/ Amp switch, the output level and the Channel settings. No setting for into a power amp that I can find. Even full bore....it's not even close. The only way I can get decent volume is to go in the main Input and use the volume knobs on the amp. Have a got a bad Floor POD Plus or is this pretty normal for these?

Thoughts?

Thanks in advance..

xtlive won't update drivers

support@line6.com — Fri, 06 Nov 2009 20:49:10 GMT

I've installed line6 monkey, and when I run it, it says there are updates available for my drivers. So I highlighted the drivers section and clicked 'update section'. It ran me through the process, and when it was done it said drivers were installed to my computer. So I ran monkey again, and it said drivers werem't updated. So I did it again and the same thing keeps happening. It successfully downloads the drivers, but they won't downlaod onto my pod. money says my device isn't connected. So I chose the device i wanted to connect, pod xt live, and clicked ok. it led me back to the monkey page and nothing happened. this too, repeats when I try it. my computer recognizes that it's connected, but monkey doesn't. I have the latest version on monkey, if that makes a difference. I don't know if my gear is registered, but when i first tried to update the drivers it said checking gear registration and then did the download, so it must be registered.

Installing model packs to my podxt

support@line6.com — Fri, 06 Nov 2009 18:55:05 GMT

Hi, i am thinking about buy the model packs to install them in my pod xt. It is necesary to have the pod registered to my line6 account? or can i install them directly without have registered my gear.

thank you, hope anyone will be able to asnwer my question.

Pocket Pod Vista driver issue

support@line6.com — Tue, 20 Oct 2009 21:17:55 GMT

After much struggling and reading, I gather that because the Pocket POD is a class compliant MIDI device and that it should work with Windows Vista, no further help is being offered? I am very frustrated because my new Pocket POD doesn't show up as a MIDI device on either of my Vista computers - Windows just insists on looking for a driver.

Is there perhaps a kludge driver available?

BTW I have exhausted all possibilites mentioned here.

My POD XT Gives me the blue screen of death

support@line6.com — Thu, 21 May 2009 01:35:43 GMT

When I turn off my POD XT it gives me the blue screen of death it states something about a memory dump and then I have to reset the computer totally and reinstall the drivers. Do you know what may be causing this problem? Thanks in advance for you answers

Faifai

Pocket Pod and Line6 Monkey

support@line6.com — Sat, 11 Jul 2009 11:31:20 GMT

What are the steps to select the device in Line6 Monkey for my new pocket pod?

I don't see an option to select Pocket Pod in the list of devices. Also if I select Pod 2.0 - it doesn't update the firmware.

I am using a macbook. How do I know if the USB cable is bad? The lights are on, on the Pod so I am guessing it is powered.

Any point in using a tube pre-amp between POD 2.0 and the mixer?

support@line6.com — Wed, 22 Apr 2009 15:13:32 GMT

I use a POD 2.0 in church and we recently got a PreSonus StudioLive mixer with firewire recording. On the first round of tracks we recorded live and mixed down, the guitar sounded like crap - very harsh. I already pulled my BBE 462 out of the path, but is there any point in keeping the tube preamp/DI box in the mix. Previously, our mixer was an old Behringer that sounded pretty rough, so preamp warmed up the tone a bit. Any thoughts on the subject out there?

podXT will not boot

support@line6.com — Fri, 11 Sep 2009 20:02:24 GMT

The subject line should probably be that it will not boot 99% of the time. Occasionally, it will boot.

However, this is what usually happens. I turn on the power switch and the screen flickers and the save, mod, delay, and cab lights light up. Then the buttons and screen go dark and the unit goes into a loop and repeats the same action until I turn it off.

I have tried booting in Safe mode and reflashing several times. Although it says it is successful, it will go into the same loop after reflashing. When I boot in Safe Mode B, it gives me a message that the SRAM test passed. The other test mode (the far right channel button) passes everything but FBX and Midi (which are listed as failed). I do not have a pedal or midi hooked to the machine, so I am not surprised that these show failure.

I have uninstalled and reinstalled all drivers on my PC and have tried to reboot with nothing hooked to any of the pod's inputs, including USB. Any thoughts on other fixes or the root of the problem?

Jeff

追加されたモデルパックの音がおかしい。

support@line6.com — Sun, 08 Nov 2009 07:33:25 GMT

ＰＯＤｘｔについてです

Metal Shopを導入済みなのですが、最近音がおかしくなりました。

デフォルトでもそれなりにいい音を出していたのですが、最近は全ての音が歪まなくなりました。

どうすれば直るのでしょうか。

i have recently bought secondhand pod xt.

support@line6.com — Sat, 03 Oct 2009 23:05:49 GMT

i would like to use online facillities, but pod is registered with previous owner. can anyone help me sort this out?

PODxt Live Serial # problem

support@line6.com — Wed, 16 Sep 2009 01:53:32 GMT

HI i bought a PODxt live from a fellow musician a few years ago and it appears that he already had registered the POD...the problem is i dont know where the hell he is... now i cant download anything cause i dont have the passwords.....is there any solution to this? thanks!

Need latest eprom firmware for my POD 2.0

support@line6.com — Wed, 29 Apr 2009 01:29:56 GMT

Hi. I registered my POD 2.0 on your website. I need the latest eprom firmware. I know that Line6 sends and sended this eprom for free for their customers. I bought this POD 2.0 in Boston in 1999. Now I live in Argentina. I need and answer I was 10 years trying to get the next version of the eprom firmware. I wish the latest one. I appreciate any help.

Thanks to anyone out there that can do anything to help me,

Darío.

Pocket Pod and Vyzex Editor

support@line6.com — Sat, 12 Sep 2009 18:56:49 GMT

I'm working with the pocket pod Vyzex editor, and can't figure out how to change the name of the patch at the very top of the screen (right under "the ultimate tone for mobile guitarists"). The documentation says that all you have to do is click on a sound in the channel bank (right under where it says pocket POD), and it should appear there, but it doesn't. USB and all appears to be working fine. I can't quite figure out which sound I'm working on, if it doesn't show up at the top.

Can you help?

Thanks,

Maggie Clement

mail@maggieclement.com

connecting pod pro to computer

support@line6.com — Wed, 08 Jul 2009 19:20:37 GMT

can you give me a step by step on how to connect my pod pro to my computer to download or transfer patches or tones?

DC Pocket POD

support@line6.com — Thu, 27 Aug 2009 06:27:51 GMT

This is a technical question regarding the power supply for the pocket pod. I purchased a Power DC supply from Guitar Center who claimed it would work for my Pocket Pod. It has the right specs according to Line 6- however when i tested it out, it created a ton of feedback that was overpowering the guitar's sound as opposed to when i used the batteries on the pocket pod. I don't know if this is typical, but it only happens when the pocket pod is plugged into the wall. I was going to buy line 6's DC power supply, but i could not find any place that sold it. The one i bought was supposed to work, but i can't use it when it generates this much feedback noise. Is there anything i should try? Could it be a technical issue with the Pocket Pod? Is there a different DC 9v power negative tip supply i should purchase?

pocket pod

support@line6.com — Wed, 21 Oct 2009 22:32:27 GMT

cant find the extended manual for the pocket pod on your site. thanks.

USB connection problem

support@line6.com — Fri, 06 Nov 2009 22:18:38 GMT

I tried all the suguestions on the troubleshooting page and the gearbox still said that the usb cable is not connected. Tried different hubs, 3 different usb ports, installed all software and drivers on another pc and it still doesn't reconize the usb.

About ready to take it back to the store and get my money back. Can anyone help before I do? thanks, Dale

Used POD XT can't register

support@line6.com — Wed, 11 Nov 2009 21:43:05 GMT

hi, before start, sorry for my bad english...

ok, this year, i've buy an used pod xt on ebay, i remember my first time use,
i couldn't use line6 monkey for install softwares on my computer because the pod was already registered on another account...

i've asked previous owner, and didn't remain to have register the pod itself...
According to its councils, i've downloaded and install all software manually and all worked fine for a long time

but, recently i see promo on line6 website (who contains classic + fx + metal pack for 99$)
and naturally, i can't buy it because my pod is already registered on another account and now, no more choice, i must register the pod before continue...

Thanks for ur help !

HELP!! ESN unknown!!

support@line6.com — Tue, 09 Jun 2009 04:10:14 GMT

I have a used XT Live that I am having probelms with getting it to recognize.

I am currently running vista64

When I am in Monkey it see the xt live but shows the esn as unknown,

My drivers, and firmware are all showing up to date. and all have been re-installed a couple of time.

I have tried all six different USB port on the PC it self.

I have tried it on my laptop and it shows the same.

I have tried a different cable, and the same again.

When I go to the "optional add-on" tab, in the help box, i see:

There was an error determining which Add-Ons you have installed. ((Code 80007506) The asset table in the hardware is corrupt.)

Click the 'Reinstall' button to fix this problem (you must be connected to the Internet)

Call Customer Service if you click 'Reinstall' and still see this error.

I click re-install and instantly show error and message shows that says:

Transaction Failed

Reason: (Code 80003009) Server error reading and writing firmware

If you have popup blockers, anti-spyware, anti-virus programs

running, Try temporarly diabeling them

I have disable and shut off everything I can find that would be considered one of these and still no luck.

I have looked on the device it self and I have a ESN number and it is not all zero's.

It shows XT Live v3.01

usb v1.12

esn: (not sure if I should post it but it's there)

I had it there when I first started working with it and had problems with the registation and got that resolved and now I can't loan the pack I have purchased.

WHAT ELSE CAN I DO?????

Thanks.

How do I connect my Variax 300 to my Pod Pro?

support@line6.com — Fri, 30 Oct 2009 07:16:16 GMT

Help!!!! How do I connect my Variax 300 to my Pod Pro?? I can't find anything in the manual and can't see a corresponding input on the rear panel - if anyone can help I would be grateful - regards Dave

My POD 2.0 is not detected by Line Edit or Monkey software

support@line6.com — Tue, 07 Jul 2009 21:02:12 GMT

Good morning,

Thank you very much for your e-mail, I really appreciate. I have been 
following your instructions but unfortunately either monkey 
or line edit software does not recognise my POD 2.0. 
I am not able to select any MIDI in port before starting any software.
 Any of my USB MID cables does not come with drivers or updates
 (It is the 3th cable that I buy already). Line 6 Monkey gives me the 
same problem and gives the following message….”Failed to connect 
to the selected Line 6 device using the specified MIDI ports
 (Code 80009001) could not find specified midi device"
 My pod 2.0 is no MIDI mode preset in “A” to read any channel. 
Cables are in with out and out with in. What am I doing wrong?

Thank you very much and have a nice day

Best regards

Alvaro

Test your ears: PodXT or Roland COSM/AdrenaLinn combo? ANSWERED!!

support@line6.com — Fri, 28 Aug 2009 04:37:37 GMT

I just added 2 new songs to my music website: "What You Want" is the song on top, and "Half Truth" is the next song down. One song has a simultaneous combo of Roland COSM amp model and AdrenaLinn amp model & effects on the guitar(s), and the other song has all PodXT on the guitar(s). One song has Bass Pod(non XT) on the electric bass, and the other song has Bass PodXT on the electric bass. Your goal is to figure out which devices go with which songs. Whoever gets the most correct gets this months virtual Golden Ear Award. Please tell me how you like these songs and how they can be improved. Here is the link:

http://www.soundclick.com/bands/default.cfm?bandID=224436

Pocket Pod Recording Sound Problems?

support@line6.com — Sat, 08 Aug 2009 02:50:51 GMT

So I'm recording stuff with my pocket pod for the first time and it all sounds like garbage and clips like crazy. So I blame the hardware on my disasterous computer and swtich it to a nice Alienware. Now the clipping is gone and the sound is clear, but when I record there is some awkward phaser-like effect that kicks in about 6 seconds into recording. Its not like a real phaser effect but that's about as close as I can describe it. The only effect I have on the tone I use is Bypass. I get this weird phaser thing no matter what tone I use, except cleans. The cleans sound fine. To help clarify what I'm talking about I recorded something and uploaded it. A few seconds in the tone starts to mess up and it just gets ugly. Oh, and I'm using Audacity to record, if that helps.

Any help would be really nice.

Line6Edit PODxt Live

support@line6.com — Fri, 30 Oct 2009 09:22:13 GMT

I have installed Line6Edit and JRE6 but it still give invalid JRE and some JNL error. OS is Windows Vista.

Registration problems......no updates for you!!!

support@line6.com — Tue, 13 Oct 2009 00:50:00 GMT

I am desperately seeking help in getting my pocket pod updated via the Monkey. I would like to update my firmware to the latest version so I can use the USB feature to lay down some tracks with my studio software. The monkey will not allow me to update because it says my product is not registered. My product is registered and shows up as being registered in my acct info. I have tried everything at my end to get this thing to work short of flinging my Pocket Pod at high velocity against the wall, which right now seems a very satisfying concept. Helpful suggestions would be appreciated. Thanks

Message was edited by: fang141

can't register my pod xt

support@line6.com — Thu, 25 Jun 2009 17:58:40 GMT

I bought this pod xt and the previous owber has already register the product. I want to register it for my account now.

Line 6 Edit fails on MacOs X 10.4.11 with Java Errors

support@line6.com — Thu, 20 Aug 2009 02:52:00 GMT

hi,

here Line 6 Edit v.3.01 fails on Macos X 10.4.11 with latest Java installed.

I tried to find answers in the discussion groups, but as far as I can see, there are no solutions to make Line 6 Edit working on MacOs X.

Same problem with MacOs 10.5.x, as I've learnt.

Are there maybe third party software for editing a Pod 2, or shareware editors out there, which are working ?

It would be a pity not to be able to get data in and out of the POD 2 with my mac.

For any tips thanks in advance

Best regards

youme

please

support@line6.com — Sat, 07 Nov 2009 17:28:20 GMT

i need to register my xt pod live

but i think need a support ticket `cause

i`m not the original owner

please help

Software for POD 2.0

support@line6.com — Fri, 23 Oct 2009 15:36:18 GMT

Is there any other software i can use with POD 2.0, besides Line 6 Edit? PodFarm, SoundDiver, etc.

I have my POD connected to the computer through a set of cables that adapt the POD MIDI IN & OUT to a USB port in the computer.

Thank you

Miguel

Can my Bass Pod create an Acoustic Bass sound?

support@line6.com — Sat, 22 Aug 2009 21:29:10 GMT

I have a 4 year old bass pod. Is there a downloadable setting or something that will help me create an acoustic bass sound from my electric bass guitar?

POD XT Live wah pedal question

support@line6.com — Sun, 25 Oct 2009 02:24:49 GMT

For some reason the wah minimum on my POD's wah pedal will not be 'tweaked'. The 'wah minimum' will start out on 72 or 78 percent (can't remeber exactly) and i can change the minimum but it will just go back to where it was and quite frankly it sounds awful (no offence to Line 6)! Any advice on how to fix it or anything i should do or change?

Podfarm cant find my PODxt as plugin with PTLE7.4

support@line6.com — Sun, 01 Nov 2009 19:29:32 GMT

I know that podfarm can only be used as a plug-in with the podxt, but when i open a session and check podfarm as a insert,

it tells me that its no authorized device connected. When thats being said, i cant go into preferences in podfarm and change to the podxt cause of its plug-in interface.

My pod is up-to-date with the monkey program, and shouldnt have this problem.

I also want to mention the gearbox crash PTLE when i record enable the audio track, but as standalone it works perfectly.

I rather not use a cable from my POD to the mbox2, cause the soundquality gets noticeable worse

problems recording with my pod studio gx

support@line6.com — Mon, 12 Oct 2009 01:53:30 GMT

hi i have a pod gx studio

i have registered it and thats gone ok

but when ever i try to record something with it, it cuts out every like 5 seconds for a second, making recording near impossible, and then when i play back what iv recorded, where it has cut out, it just drags the points of where it cut out and back in together, so it sounds like a skipping cd

my computer has 1,5g ram and 3.5ghz so i have been told my specs are enough to run the pod

i would just like to be able to sort this problem asap

thanks

Power Supply Concerns

support@line6.com — Mon, 03 Aug 2009 21:48:28 GMT

Hi,

I noticed the other day that my podxt power supply is making quite an audible buzzing noise. I just checked the output with a multimeter and found that it reads 10.6V instead of the expected 9V printed on the transformer. Am I right in thinking that the transformer is malfuntioning and pumping too much juice into my xt?

Thanks!

can I use the pod xtlive as midi controller?

support@line6.com — Thu, 12 Mar 2009 23:27:37 GMT

I would like to know if it's possible to use the pod xtlive as a midi controller to control my yamaha spx90 while still using the pod xtlive for its sounds.

my flash memory just wont update..wtf

support@line6.com — Tue, 21 Jul 2009 21:27:02 GMT

my flash memory just wont update..wtf

registration problem

support@line6.com — Fri, 09 Oct 2009 04:05:40 GMT

I am trying to register my podxt pro.i am the original owner & registered it when i bought it 3 or 4 years ago. I don't remember my original login etc. plse help

Pod XT as MIDI controller - not passing notes

support@line6.com — Tue, 24 Mar 2009 09:14:21 GMT

Hey there,

I was hoping to use my Pod XT as a MIDI device on my laptop. I've got my FCB1010 programmed to send NOTE data but it doesn't seem to be getting through. Midi Ox shows CCs and PCs coming through but not notes. I can also control the Pod itself directly using the FCB, just as I would expect.

Setting MIDI channel to 1-16 or OMNI has the expected effect but notes still don't get through. Also, neither setting for MIDI Output, Thru or Output, has passed notes. I've double checked the FCB with another MIDI device to verify the data is being sent.

Has anyone else got experience with using the Pod as a MIDI device with Live, Reason, etc, and had success passing notes?

Thanks!

Tom

More 'Banks'

support@line6.com — Thu, 26 Mar 2009 08:40:51 GMT

I know this might sound greedy, but is there anyway to increase the number of 'banks' on the POD XT live?

Problem with Edit (Bass Pod XT)

support@line6.com — Sat, 06 Jun 2009 18:33:05 GMT

Hello to all and sorry about my poor English.

I want to edit my tones with my computer. As far as I understand I can only use Line6 Edit for this purposes, because Line6 Gearbox doesn't support Bass Pod XT.

I've installed Monkey and made all upgrades of my software - drivers, flash etc. Then I've installed last version of Edit(v. 3.02 today). When I run program I see window with label "MIDI Devices" where I see my Pod - It is connected with USB (In the picture).

Then program start to load device Tones, but always failed. I always see next picture:

MIDI Timeout... But I use USB connection! After clicking OK button I see "No device connection".

If I trying to edit tones I see strange things: If I make some changes with my Pod I see changes on the screen - pushing buttons, use tuner etc. But I can't save it in pod using program. If I make some changes in Edit my Pod doesn't see it - no changes on device.

I also can't load anything from Customtone.com to my Pod.

What should I do? Please, help!

______

With thanks

Aleksey Trefilov

Pod xt live input jack

support@line6.com — Thu, 24 Sep 2009 14:19:01 GMT

I have been having issues with losing the signal from my guitar(s) to the pod..or sometimes losing volume to a thin weak signal.

It seems that tmoving the 1/4 inch guitar cord at the input jack temporarily fixes it but I fear there is a problem with the input jack.

I bought a new cord and it still does it.

I live in Northeast Ohio, How do I go about finding a service center for the POD XT live?

Mine is approx 5 years old.

Thanks

Bob Schmid

330-XXX-XXXX

cell -330-XXX-XXXX

Midi Controller with PODxt when using amplitube JH?

support@line6.com — Sun, 28 Jun 2009 18:39:47 GMT

Hey guys, I was just wondering if this would be possible.

I have a PODxt which I have been using as an audio interface for use with amplitube Jimi Hendrix. I have only downloaded the demo version but I love what I'm hearing. What I would like to be able to do is to switch the effects on and off and also have an expression pedal so I can control wah or univibe speed. I don't want to spend the money getting the full version if I then have to go and buy one of IK's stealth pedals and the extra boxes to go into it. Would something like the behringer FCB1010 plug into the PODxt and then be able to control the effects on amplitube?

I'm really not up to speed MIDI and I would really appreciate anyones thoughts on this.

Mirrorball

XT Live USB output level much too high

support@line6.com — Thu, 07 May 2009 22:26:08 GMT

Hi,

my POD XT Live produces a way too high recording level through the USB / ASIO connection. Audacity, Riffworks, Ableton all heavily distort because the the level hits maximum.

On my old Win XP machine, this all worked fine. Now, on my new XP machine, with the POD being unchanged, it doesn't. I have to reduce the volume with the pedal to about a fourth to get a normal recording level.

- The output mode is studio direct

- The output switch is in "line" position

- POD is connected via USB to the computer

- Replaying formerly recorded songs through the POD works fine

- The headphone level is perfectly ok and the little black knob is in its usual position.

- I tried reinstalling the latest drivers, rebootet, etc..

- The guitar is a Variax connected digitally to the POD.

- I checked all the Asio driver setting and couldn't find anything unusual.

POD Firmware is 1.12, Drivers are 3.4.3.1 (tried 3.4.3.6 also)

I am kind of desperate, since I cannot do any recording properly.

Any ideas?

Hermann

Pocket Pod

support@line6.com — Mon, 23 Mar 2009 00:12:32 GMT

My usb cable is not working, Can I buy just the cable somewhere. Is it universal.

Linux support

support@line6.com — Thu, 08 Oct 2009 04:55:36 GMT

Hey, Guys!

Is there some project about Linux support? Drivers? Software? Tools?

Please, the Linux users need more attention, because we are now a significant part of your market!

Regards,

Felipe.

Windows says POD XT Live driver installation failed, cannot proceed with installing POD XT drivers?

support@line6.com — Mon, 26 Oct 2009 20:53:47 GMT

I'm running a Variax 700 through a POD XT Live, and using workbench on Windows Vista on an HP DV9000 series laptop. Everything was working fine until i tried updating the firmware on all my devices using the Line6 Monkey. Since then, none of the applications are recognizing that my POD XT is connected to the laptop. I tried reinstalling the POD XT drivers, and when it asks me to connect my device using the USB cable, I do, and Windows fails to automatically install the drivers for the POD. I even tried restoring Windows to a previous state, and tried reinstalling all the software and drivers, but it still gives me a driver installation failed error. Everything was working fine, I had made custom tones, and i loved them, but now everything's gone to hell! What to do?

line6 & mac

support@line6.com — Wed, 07 Oct 2009 12:40:00 GMT

Hi I got a pocket pod today and plugged into my mac mini's "Combined optical digital audio input/audio line in (minijack)" and when using windows (dual boot) everything works fine I can hear the guitar through the speakers (just playing on the desktop or anywhere) and record everything fine. When I go onto mac OSX I can record fine but I can't hear the guitar through the speakers whether recording or otherwise. Another thing is the tap function for the rotary speaker, it doesn't seem to work.

Many Thanks in advance

Adam

POD XT Live, No Power

support@line6.com — Thu, 02 Jul 2009 00:49:51 GMT

I recently sent in my Pod XT Live to be repaired (I got both menu selection knobs replaced). I recieved the unit back, it worked for a day, and now it will not power on. When I plug it in, the only sign of life is the LCD display's back light comes on. There is no text, just the backlight. Any ideas?

podxt panning

support@line6.com — Thu, 23 Apr 2009 02:37:35 GMT

Is there anyway to assign a specific tone to a side? Im using an old musicman amp with 2 inputs and was wanting to have my clean setting on my pod split out to the left and into channel 1 while my OD setting would be out to the right and into channel 2. Is this possible on the podxt itself? I saw that panning is accessible through gearbox but thats all Ive found so far.

8000900C is killing me

support@line6.com — Fri, 14 Aug 2009 17:06:29 GMT

Hey all,

So when the Pod X3 Live became available, i bought one. I used it for some time until i wanted to connect it to my pc, to edit tones more easily. I got the 8000900C error.

I had it changed. Three times. I tested on 3 different PCs because i thought something was wrong with one of them. But with 3? No way. So the fourth Pod X3 Live i got worked ok, at last.

Which brings us to now. I had to reinstall my XP. Nothing has changed with my computer hardware, i only reinstalled Windows XP. And this error is back. I can't do anything. I cant edit sounds, i can't save the ones that are in my XP Live's memory to save them.

So what is wrong? Can a pod X3 Live work fine, and then some day have this error? Or is something wrong with my pc?

I'm about to break something, so please help me.

Line 6 POD 2.0 Weird Sounds

support@line6.com — Mon, 23 Mar 2009 16:22:47 GMT

Hi! Im having these weird sounds coming from my Pod 2.0. When I turn it on, it starts to swish or something. I dont really know the word, but something like swish. Turning the volume down doesnt help it at all. It overrides the Pod 2.0 sounds. I hope you can help me with this cause I really like Line 6 products and I would like to make it work again.

Sincerely

Tuukka Kolkka

My pod XT live serial number is alredy in use???

support@line6.com — Mon, 14 Sep 2009 02:55:38 GMT

I have this problem trying to register my pod XT live. I bought it brand new through ebay 4 years ago and i never tryied to register my gear till now, but when i tryied to do it, it says my serail number is already in use! it cant be serious! pod xt live hackers? cmon... some similar cases???

(sorry about my english).

Nicolas.

Buenos Aires.

no tones sony vaio laptop help

support@line6.com — Sat, 02 May 2009 08:30:11 GMT

hi I have a guitar port happily connected to a sony vaio desktop PC. Why wont it work when i conenct it to my sony vaio laptop. It will play other windows noises and tracks but will play no tones. 4 hours of frustration last night need help!!!!!!!!!1

Original FBV floorboard compatibility

support@line6.com — Wed, 26 Aug 2009 23:43:00 GMT

I recently received a FBV floorboard from a friend who didn't need it anymore.

It's the one of the older models that has the 3 segment LED display and both wah and volume pedals

I am tryin to get a BASS POD XT PRO for my live rig and I was wondering if it is posible to use this particular FBV to control it.

Thanks to anyone who can help me out.

Here is a picture of the board that I have

My POCKET POD not recognized by Monkey - PLS HELP LINE 6! URGENT

support@line6.com — Mon, 26 Oct 2009 00:39:02 GMT

Hi,

I am using 7 products from Line 6 for 2 years already. Yesterday my computer died so I bought new and installed Monkey and everything again.

6 of my products have no problem , but POCKET POD is not recognized. I tried to remove it from the registered gear and register again probably 20 times today - no use. LINE 6, can U please urgently help so I can use POCKET POD fully - I am planning to update firmware on it as well - which I cannot do without Monkey...

Many thanks for Your help,

kind regards,

Jozef

help updating pod 2.0

support@line6.com — Sun, 05 Jul 2009 21:56:29 GMT

i recently bought a pod 2.0, and just connected it to my PC today

it is registered and all, and is recognised by line 6 monkey, yet when i click install update for the firmware, it says its updating etc, yet when i turn my pod off when it says too, it still says that the firmware needs upgrading from 1.00b

help!!!

cheers

Upgrade to 3.01 - Can not find new wah and amp models

support@line6.com — Sun, 08 Nov 2009 22:14:03 GMT

I've just reflash memory in my PodXt live, in order to get this list of news features in version 3.0, but at the end of the upgrade, I cannot find them inside my Pod. ? I've tried to upgade from a file, directly from the server, erasing my old patches but never reach to see this new features. Some help?

By the way, no problem with midi connection, no problem with Line 6 Edit even Monkey.

Thanks!

STOMPBOX EFFECT MODELS:

Bass Overdrive (based on* Sans Amp Bass Driver)
Bronze Master (based on* Maestro® Bass Brassmaster)
Bender (pitch bend effect)
Sub Octaves (synth effect)

SELECTABLE WAH MODELS BASED ON*:

Vox® V847
Custom Vox® V847
Colorsound® Wah-Fuzz
Maestro® Boomerang
Cry Baby Super – Jen Electronics
RMC Real McCoy 1
Arbiter® Cry Baby

AMP MODELS BASED ON*:

Marshall® 1974X (18W Reissue)
Marshall® JCM 2000
Orange AD30TC
Vox® Fawn Non-Top Boost AC30
Dumble® Clean (from POD® 2.0)
Soldano SP88 (from POD 2.0)

Adjusting effects volume for a line 6 bass pod xt

support@line6.com — Tue, 10 Nov 2009 01:18:17 GMT

Any time I select an effect on my bass pod xt, its volume is so high compared to the regular volume of pod

On most effects pedals, I can just adjust it and turn down effect's volume to match my amp

Thus how can I e.g. adjust the screamer effect volume on my bass pod to match the regular volume of the pod

computer noise in brand new floor pod plus

support@line6.com — Thu, 07 May 2009 05:31:45 GMT

I just bought a new Floor Pod Plus from Sweetwater, and just out of the box it produces an unbearable noise, all the time, no matter what settings are on. This happens through my PA and through headphones. The noise is not in synch with any effects or amp model; it sounds like a hard drive is whirring inside the Floor Pod.

This happens even with the unit plugged into a conditioned line all by itself, and also in other outlets. I'm pretty sure it's not a ground loop. I don't have problems with ground loops in my studio. This noise is different from ground loop hum, anyway. The sound is similar to the noise that a poorly insulated sound card picks up from a hard drive, but it's coming from within the Floor Pod Plus.

Do I have a defective unit? I'd hate to ship it back, but it's just not usable at all. I've not found anything about this anywhere else on the web. Any help would be appreciated. Firmware upgrades? Something obvious that I'm missing?

The POD mounting bracket screws

support@line6.com — Sat, 09 May 2009 02:28:31 GMT

The POD mounting bracket description mentions screwing the bracket to the POD. What size and length screws should be used, before I screw something through something that shouldn't be screwed through, if you get my meaning? Also, is there a carrying case for the POD 2.0?

Variax 600 jack damaged

support@line6.com — Tue, 27 Oct 2009 16:17:42 GMT

Hello, I live in Brazil and I own a Variax 600. I use the Variax cable and I stepped on the cable and damaged the guitar jack.

The plastic piece broke and even after I glued it together, the connection is not reliable anymore.

I need to buy a replacement guitar jack for the Variax cable.

Habro, the distributer in my country, does not offer the piece nor support to me since I didnt buy the guitar from them. I brought in the USA when I was visiting.

Can anyone help me?

The sketch in the picture below show the piece where it is broken due to the cable pull.

Thanks.

Guilherme

2 pack offer ???

support@line6.com — Fri, 28 Aug 2009 11:04:11 GMT

Dear LINE 6,

I am interested in puchasing your Metal Shop + Collector Classics in for the price of $29.95, but I already have purchased and installed the Metal Shop. Would it be a problem to buy the pack and install only the Collector Classics?

Thanks

Emil Kolev

Pod XT - What are you connecting to?

support@line6.com — Sat, 05 Sep 2009 11:44:19 GMT

Has any Pod XT user 'come up' with a Tone Correction setting (ie Lows,Focus,Highs) in the 'What are you connecting to?' feature for the Fender Blues Junior Amp as the Target Amplifier? - kind regards Rod.

Community : Popular Threads - POD, Pocket POD, PODxt Family, FloorPODs, Bass PODs

MAC OSX 10.6 Snow Leopard x86 & Line6 Edit for PODxt Pro

Windows 7 64bit

Recording Music

Pod XT Live Expression Pedal Failure

POD 2

Pod 2.0 to laptop connection freak-out and frustration!

Pocket Pod Footswitch! Anyone know what this is?

Recording vids directly to PC using Mic or USB plug

forgot password, deleted email.

Getting hum when I plug my usb cable into my computer.

Is there a video anywhere that shows how to navigate the buttons on my pocket pod

Pocket POD registered to my Account - Line6 Monkey says it is not.

Upgrade not working properly

Line 6 Edit Errors and Crashes

Monkey doesn't show Pocket POD 1.01 flash update

New to Line 6....Need Help!

I've switched my email addres...

Pod XT ASIO drivers stop working in Cubase

IRELAND + UK Power Supply for POD 2.0

PODxt Soundcard Problem

windows 7 compatability with podxt live, variax, workbench

E-prom chip for pod

Windows Vista 64 bit problems with ASIO Pod XT

AUX input on floor pod plus

how to upgrade pod 1.x to 2.0?

Line 6 pocket pod, something doesn't work

Permanently saving a custom tone to my Pocket Pod

Free Pod Farm Plug-in for PODxt Pro owners?

More Line 6 edit Java Problems....

Why Does My POD XT Live Go Mental?

Substitute for Line 6 EX1 Expression Pedal

I have just downloaded Edit but it will not work.

update usb firmware pod xt from 1.01 without MIDI USB interface?

Pod XT Live &Windows 7

Why does my Bass Pod XT live go mental???

help request

Bass pod

Second-hand PODxt Live Registration

Bass pod pro

Phaser effect in POD XT live

About Recording of Pocket Pod

Line 6 Edit Problem

XT Live driver installation problem

PodXT not connecting on OS X via USB

Pocket POD: Is Cabinet Tuning of Amp Out jack Independent of Direct Out/Phones jack?

POD 2.0 and PODxt are the

Bass Pod xt live warranty question

Problems with Download Java Runtime Environment for Line 6 Edit v 3.02

Cannot register my PODxt

Ran Line6 Monkey on new computer, now the Metal pack add-on is gone from my PODxt.

Bass PodXT Midi Timeout

re: Pod XT Live and installing line 6 edit

No me funcionan los models packs en el POD FARM con mi POD XT Pro

Pod 2 audio cuts out when in A.I.R. amp mode

Reamping issues W/ PodXT Pro

pod xt pro 4 buttons innoperante

Bass POD XT registration

I bought a podxt recently and was going to do some updates and it said it required a cd of somesort to complete the update. My podxt didn't come with a cd. Where can I get one so I can update and get some add onns?

Blank Yellow Screen....most times

De-Register problem

pod farm + podxt pro + win 7 64bit

have some problem

Line 6 studio ux2 question.

Pod 2.0 and Floorboard

PodXT USB Firmware Update

problems with FBV Shortboard recognition, and older product registration

PODX3Live

Pod XT Live into Engl Invader 150

Can't register my used PodXT Live...

it just stopped

Where is the Bassamps located in my POD xt LIVE?

Already registered?

Greetings...

Im not receiving password resets!!

Bass PODxt Pro as an FX looped device

PODxt Flash Memory Installed Version Listed as "-" in Monkey

Connecting POD 2.0 to the computer

pod xt factory reset

Not a technical question, but functional

Thoroughly Confused by Java Error Problem!