Community : Thread List - All Communities

Studio UX2 and Pod Farm - Freezes my computer

support@line6.com — Sun, 22 Nov 2009 07:32:25 GMT

I was trying to install my new Studio UX2 and Pod Farm.

I downloaded the latest Pod Farm for Snow Leopard and it keeps coming up with an error message:

The System extension "/System/Library/Extensions/Line6Audio.kext" was installed improperly and cannot be used. Please try reinstalling it or contact the product's vendor for an update.

What does it mean? I downloaded the latest driver as well from the "Downloads" and it came up with the same message.

Also, as soon as I plug in the Studio UX2, it freezes my system straight and I have to Force Shut Down.

Can anyone tell me why it happens?

Thank you

Anything new out there?

support@line6.com — Sun, 22 Nov 2009 07:32:10 GMT

Getting lonely in here.Just wondering if anybody has anything going on.

PODxt

support@line6.com — Sat, 21 Nov 2009 23:39:41 GMT

what free software download do I GET ? I JUST BOUGHT THE PODXT ANDWHAT I DOWNLOADED DIDN'T WORK AND HAD ISSUE WITH JAVA---AND MY JAVA IS UP TO DATE VERSION. ALSO I WANT TO STOP THE COMMUNITY MESSAGE AND DON'T REMEMBER HOW I TUNED IT ON. THANK YOU !

2x12 4x12 missing on pod xt pro

support@line6.com — Sun, 22 Nov 2009 01:07:27 GMT

when i press the i/o dig i get to the page what are you connecting to and i cannot get the studio direct to change to 2x12 ,4x12 also the series fx loop and spdif digout are missing from the same page.

the firmware is version 3

do i have to set this to turn the mics and room components of air ?

and if i wanted to go back to an earlier wesion of the firmware how would i do this.

distortion on D string piezo

support@line6.com — Sun, 22 Nov 2009 00:26:49 GMT

Hey Guys,

I was doing some recording in the studio the other day and noticed that the D-string on my variax 700 is making a buzzing sound when I record. I triple checked i wasn't getting a fret buzz anywhere. The more I looked into it the more is sounds like a distortion on the piezo.

I've attached a sound file of it. My chain is Variax > VDI > Pod X3 Pro > USB > Logic Studio 9.

I've recorded it completely clean and have included a comparison of the G string too.. the attachment kept failing so its here: http://public.me.com/sb00020

I'm guessing I'm going to need to get it replaced. Does anyone have any experience with similar problems? How long did it take to be repaired etc? I'm in the UK if that makes any difference.

Thanks in advance

Sam

Spider Jam questions

support@line6.com — Sun, 22 Nov 2009 06:46:54 GMT

Hello,

Is the Spider Jam amp in the same family as the Spider IV line or is this a Spider III line? Is there such thing as a Spider IV Jam amp?

Also is the Shortboard (older version) compatible with the Spider Jam amp or only is the MKII unit?

Thanks

Variax Bass Pickguard Material

support@line6.com — Sat, 21 Nov 2009 21:43:25 GMT

Hi,

I just love the color of the Variax Bass Pickguard and would like to have a custum one made for my Variax in the same material.

1. Is it Black Pearl or is it Silver Pearl?

2. Where would I be able to buy a blank sheat of this material?

Regards, Carlo

Backtrack Flashes Blue - but won't capture.

support@line6.com — Tue, 17 Nov 2009 01:30:54 GMT

I recorded one band rehearsal with forced capture and then transfered the files to my IMAC and deleted them from the backtrack. It will only flash blue now and won't capture at all.

I saw a thread about hidden files that may be telling the unit it is still full? It seems everyone in that thread in May had to send their units back.

Do I need to send this back or is there now a fix?

Please advise what I need to do, as the unit does nothing now...

Thanks,

John

Benefits of running latest Gearbox vs. an old version?

support@line6.com — Sun, 22 Nov 2009 02:41:50 GMT

After not using my recording/practicing computer for a long time, I blew the dust off and fired her up again, but the old UX2 drivers didn't want to load for some reason. Long story short, all that's fixed, and I'm now running the 3.4.3.8 driver, 1.01 firmware, and Monkey 1.31.

The only question is whether there's any benefit to updating the old Gearbox from 1.02 (yeah, it's been a really long time... lol) to the latest 3.70. Are there any improvements to be gained in terms of functionality, stability, etc.? Or is it just simply a huge, unified driver that I don't need which includes all other Line 6 products?

Sorry if this question is a bit esoteric, but 1.02 seems to work fine, so in this case I'm somewhat of a believer in "if it ain't broke, dont fix it". Anyone happen to know?

DL 4 bug!

support@line6.com — Tue, 09 Jun 2009 06:06:33 GMT

Hi!

I have noticed a BIG problem with my Delay Modeler unit. I'm not able to save any multi-head presets!

I've owned a DL 4 earlier, and I don't remember it having this problem. I peeked inside, and noticed the EPROM version to be v1.6. Could it be possible for me to upgrade the EPROM-chip to a newer version? Could it be possible for you to send me a new chip? I think I could manage the replacement myself, or at least a qualified repairman should be able to do it. This would save me so much time, since I'm a professional musician, and I really couldn't wait to much for a new pedal.

Thanks,
Joona

Gearbox plug-in not working in QAM Promise

support@line6.com — Sun, 22 Nov 2009 05:25:54 GMT

Howdy. I'm running a Guitar Port, Line Monkey 1.31, Gearbox 3.7 and QAM Promise 4.60. When I activate an auxilary channel in Promise and select the any of the VST Gearbox plug-ins (Mono, Mono Stereo, Stereo), and then go into the plug-in UI, I can see the Gearbox UI as I'd expect, and can use it just as if I was running Gearbox directly through my Guitar Port. However, for whatever reason, the plugin itself is not actually working - when I select any tone, or tweak with the effects and settings of a tone, it has no change whatsoever in the tone that Promise plays back (which is the tone and effects that I used to originally record the guitar signal).

The other plug-ins seem to work just fine in Promise. The one thing I'm wondering about is the fact that the Gearbox plug-in UI does have a message in the bottom right half that says:

READY TO ACTIVATE:

Line 6 Monkey will run and activate for you. Want to purchase? Click Purchase button in Line 6 Monkey.

Do I need to purchase Gearbox separately as a plug-in?

Thanks.