Community : Thread List - Spider

Spider lll 150 not working

support@line6.com — Sun, 18 Oct 2009 15:12:07 GMT

First it started a clipping sound, then I did the factory rest and it work for 5 minutes then the led screen has 8 bars across it and nothing else lights up or no sound. I have had this amp 2 years and it only has about 20 hours of playing time on it. I always unplugged it when not in use. I hope this can still be covered under warranty because the extra warranty expired 2 months before this problem which figures.

spider2 212 with no sound

support@line6.com — Sat, 21 Nov 2009 20:43:58 GMT

Just picked up a used spider 2 212, when buying tried it and sounded great functioned perfectly, got it home, and it powers up, lights flash etc... but no sound. Ive tried the a channel reset thing, no help. trying the power on while holding the tap button gives it sound, but just one sound no adjustments, all the knobs all make the channel select lights move after doing this. ive exhausted the net huntin for the correct procedure but i guess im missin it, any help would be appreciated....btw the way ive tried it in several power outlets as well with no help.

FBV short board compatibility

support@line6.com — Wed, 19 Aug 2009 01:00:59 GMT

I own a Spider III 150 and I have the fbv short board. Is the older FBV short board compatible with the new Spider IV? I am thinking of upgrading due to the fact that the newer amp has a seperate chorus, which is the only thing I dont like about my Spider III.

Thank you

Joe

Spider IV backup - question or suggestion

support@line6.com — Wed, 18 Nov 2009 02:21:17 GMT

I suspect the answer to this is "No", but is there a way to backup User settings from the Spider IV (via an FBV presumably)?

If not, can someone take that as a suggestion for enhancement.

Hopefully I'll never need it, but just in case.

spider IV 15 amp

support@line6.com — Mon, 16 Nov 2009 21:52:53 GMT

What amp cover is needed for Spider IV 15 ?. Also what carry bag is needed for my FBV Express ? Thanks!

FBV shortboard malfunction

support@line6.com — Thu, 12 Nov 2009 17:25:24 GMT

Yesterday I used my new Spider IV 150 w/ MK II shortboard with the band for the first time. I moved it from home, plugged it in and hooked up the shortboard. The amp worked and the board lit up but the volume pedal was on full and would not shut off in the heel down position. I was able to switch pre -sets but still no volume pedal. I procceded to use the gear without the pedal and after a while it started to work. Then the wah wah quit working. With the wah turned on both the green volume and the red wah light were lit, but the wah wah didn't function. After playing for a while I tried it again and it worked! I've got it set up again at home and everything seem to be fine. What happened? I bought this rig to try and simplify my gear set up but so far it's been a real headache. I confess that I'm not a techie and I may have bungled something but it was working fine at home ,and it's not as complicated as my Pod X3 Live pedal, which works fine...so far.

Also the FBV calibration steps that come with the downloaded Advanced Guide for the Spider amp don't do anything. I followed the directions to "power off the board, press and hold the 'D' footswitch while powering on the board'. There's supposed to be an LCD readout :Calibrate Pedal" but there isn't any such display . So I don't know if this thing is even "Calibrated". It seems to work fine, when it's working. Is it actually necessary to calibrate it?

Thanx.....

Switching Channels

support@line6.com — Fri, 20 Nov 2009 04:40:26 GMT

I just upgraded my spider III HD 150 for the Spider IV HD150 and I'm setting it up for this weeks gig. When switching between channels with the foot switch there is a half second sound cut out. I don't recall this being an issue with the spider III. Is this expected behavior?

Spider III 15W - transistor

support@line6.com — Fri, 13 Nov 2009 02:04:54 GMT

My spider III 15W stopped working, at the repair shop they determined a transistor blew up and is now unrecognizable. Does anybody know where to get the circuit board blueprint??

Can I add a cabinet and connect it to my spider 4.

support@line6.com — Fri, 13 Nov 2009 00:38:58 GMT

say have the spider 4 run my marshal cabinet with out voiding the warrentee?

Chorus Flange problem on my Line 6 Spider III amp

support@line6.com — Sun, 08 Nov 2009 23:26:37 GMT

My Chorus Flange dial on my Line 6 Spider III 15 watt amp, when turned all the way down to off, does not stop generating the effect. Is there a way I can fix this at home, or will this need servicing? I have already performed a factory reset.

Thanks

David

Spider III 120

support@line6.com — Thu, 05 Nov 2009 19:01:15 GMT

Hi,

I have some problmes with mi Spider III 120 amp. I turn the amp on and everything seems ok. After 10 or 15 minutes of playing it makes a sound and lowers its volume after that it makes a very loud squeling and can't play no more. If I unplugged mi guitar the squealing stops, but at soons as the cable touches the input pulg the squeling is back. It seems to be a short circuit problem or grounding issue. I unscrew the electronics and put the hardware unit apart form the speakers and the problem seems to stop.

Have you heard of something like that?... do you have any suggestions I can make myself before I pay some checkup?. The amp is a year and a half old, I'm the first owner and it has have ver light use. I like the amp a lot but right know I'm kind of dissapointed that I'm starting having problmes so soon with that little use.

I hope you can help me.

Thanks!

Regards.