Q: What are the presets on the Pocketpod?

A: The PDF document attached at the bottom of this FAQ lists all of the Pocket POD presets from 1A to 31D.

Q:  How do I reset my Pocket POD back to factory presets?

A:  To reset your Pocket POD back to its factory settings, hold the save button and 4-way arrow key up while plugging a cable into the instrument input to power the unit on. The unit will prompt for a factory reset, press save to initiate the factory reset.

Q:  What is the warranty on my Pocket POD?

A:  The warranty on the Pocket POD is 90 days from the date of purchase.

Q:  Can I purchase model packs for my Pocket POD?

A:  No, Line 6 model packs are only available for our Guitarport, Toneport, POD Studio and POD xt family devices.

Connections and Editing

Q: Can I connect the Pocket POD directly to a P.A. system?
A: Yes. You can run a 3.5 mm (1/8")cable directly into a PA. Pocket POD also has one unbalanced 1/4" output that can be connected through a DI box directly into a PA system.

Q: Is there editing software available for my Pocket POD?

A: Yes. You can download a software editor called Vyzex which was specifically designed to work with Pocket POD, from our software page.

Q: What power supply works with Pocket POD?
A: The Line 6 DC-2 power supply (purchased separately from your local dealer) is the supported power supply for the Pocket POD.  See the following link for more information:

Q: Is the Pocket POD compatible with any Line 6 or standard MIDI controller?
A: No, the Pocket POD is not compatible with any Line 6 or standard MIDI foot controller, as it lacks the CAT 5 or MIDI jacks necessary to connect a controller.

Troubleshooting and Known Issues

Q: My Pocket POD is not powering up?

A: The POD was designed to work with standard (mono) 1/4" cables. Check to make sure you are not plugging a TRS cable into your Pocket POD.

Q: My Pocket POD reboots when changing power source while connected via USB?

A: Changing the power source of your Pocket POD while connected via USB will cause the unit to reboot and its Class Compliant driver to ?drop? its MIDI ports. It is not recommended you change your Pocket POD?s power source while connected via USB.

Q: Where can I get Vyzex software support?

A:  Line 6 did not develop the Vyzex editor, but you can receive help directly from the manufacturer at the Vyzex support forum.

Q: Why is cabinet tuning not working?

A: This bug was fixed in the 1.01 PocketPOD update.  See the following link for information on how to perform the update:

Q: Why do delay changes not call up model default tap tempo?

A: This bug was fixed in the 1.01 PocketPOD update.  See the link above for information on how to perform the update.

Q:  Where can I register my Pocket POD?

A:  You can register your Pocket POD by logging on to www.line6.com. Once logged on, go to the My Account section of the site and then click on the Registered Gear link off to the left hand side.

Q:  Where is the serial number on my Pocket POD?

A:  The serial number of your Pocket POD can be found inside the battery-housing compartment behind the top right battery.